Hypermung
Member
- Joined
- Jan 18, 2014
- Messages
- 6
G'day Fellas...
These are 2 matching headlights I found recently & was hoping for an ID to enable me to find a couple of lenses.
The buckets are 4" deep & 7 1/8" across the face of the bucket (lens ring removed).
The headlight stems are held into place with a plate that has 4 rivets holding it on.... The hole in the back of the bucket is for a screw that focuses the light by pulling the sprung bulb socket in & out of the reflector.
The lens retaining ring appears to be about 6 3/4" across the opening, & about 7" overall... As I said, I have no idea what they're off & could even be off an Australian model I suppose, so any help would be appreciated....
Thanks Guys... Glenn
These are 2 matching headlights I found recently & was hoping for an ID to enable me to find a couple of lenses.
The buckets are 4" deep & 7 1/8" across the face of the bucket (lens ring removed).
The headlight stems are held into place with a plate that has 4 rivets holding it on.... The hole in the back of the bucket is for a screw that focuses the light by pulling the sprung bulb socket in & out of the reflector.
The lens retaining ring appears to be about 6 3/4" across the opening, & about 7" overall... As I said, I have no idea what they're off & could even be off an Australian model I suppose, so any help would be appreciated....
Thanks Guys... Glenn
