piston froze
- Thread starter brownbagg
- Start date
Help Support Rat Rods Rule:
24dodge
One of the Dodge brothers
marvel mystery oil works pretty good , but it will take time to penetrate.
Dobber
Well-known member
That is what I would try, I used it on a olds 350, and it worked for me....
T2T
Still running with scissors!
Heat the top of the piston with a torch, this will make the piston expand. Put a little diesel fuel, PB Blaster or what ever over the piston after it cools and let it sit over night...Then beat the crap out of it.
Willowbilly3
A *real* tin magnet
YUP. if you can unhook the con rod and roll the crank away from it, then get a good hardwood drift, something out of an old pallet becuase they are often oak. It needs to be at least a 2x2 or beefier. Then get your best bfh and lay into it from the top. After ut has moved you can go in from the bottom and drive it up.
