Undead Sleds / Rat Rods Rule - Hot Rods, Rat Rods, Sleepers, Beaters & Bikes... since 2007!

Undead Sleds / Rat Rods Rule - Hot Rods, Rat Rods, Sleepers, Beaters & Bikes... since 2007! (http://ratrodsrule.com/forum/index.php)
-   Builds! (http://ratrodsrule.com/forum/forumdisplay.php?f=21)
-   -   I'm Gonna Build A Dragster! (http://ratrodsrule.com/forum/showthread.php?t=7539)

bob w 01-14-2009 09:07 PM

I'm Gonna Build A Dragster!
 
http://i256.photobucket.com/albums/h...r/original.jpg
Over on the H--B site there is a sub-site devoted to building and racing dragsters that are patterned after the very first "rail jobs" from the mid 1950's. Here is a pic of one owned and build by a California guy by the name of Rocky. I intend to pattern mine after his. (He doesn't mind).

dmw56 01-14-2009 09:09 PM

I can't wait for this build.

wrecker55 01-14-2009 09:09 PM

cool bob, is that the new senior class the have? :cool:

bob w 01-14-2009 09:10 PM

http://i256.photobucket.com/albums/h...113trk0009.jpg
Yesterday I set my T frame, bought from a Frankensteiner, an early Ford front axle assembly I got from a local collector and a 9" rear end I have had hidden under some trees for a few years. It's a pretty humble beginning.

bob w 01-14-2009 09:12 PM

http://i256.photobucket.com/albums/h...114trk0001.jpg
Today I put in a front crossmember, suicide mount and spring mounts on the axle. I'll leave the wishbone as is and get a stock ball mount for it.

Thunder1 01-14-2009 09:17 PM

This is gonna be Cool! Keep them pictures coming!

T-1

bob w 01-14-2009 09:20 PM

http://i256.photobucket.com/albums/h...114trk0002.jpg
The requirements are to use a flathead or inline engine 1962 or earlier, or a later copy of one. I'll probably use a slant six and a 4 speed. The front and rear axles must remain full width and slick cannot be used. It will be a driver's car, not like a lot of current drag cars with all the electronic controls etc. My friend Barry is lending me his JD2 tubing bender and I have picked up the roll cage material off the shorts rack (much cheaper that way) at my favorite steel yard.
The reason for switching from my AD truck project to this is, I can do a lot of fabrication without spending much money. The truck project reached the point where I needed to open up the wallet. And there ain't much in it right now.
I plan on selling a hot rod or two this spring to finance the AD truck & this project.
I'm hoping Tripper shows up at MoKan in a year with the Panel Gasser for a match race.:D

Bonehead 01-14-2009 09:36 PM

I am so glad to see you start in on this project. We have a local rail replica out at the dragstrip. It is very cool to see. Is the JD2 hyrdaulic, or muscle powered? What die sizes?

Gastrick 01-14-2009 09:39 PM

Quote:

Originally Posted by bob w (Post 81055)
and a 9" rear end I have had hidden under some trees for a few years.

What? Do you have parts hidden around the area like dogs hide bones?:D

You are my new hero Bob W. I love those dragsters and I'm sure the one you build will be a fine example. It's already shaping up nicely.

bob w 01-14-2009 09:46 PM

BH, the bender is muscle powered. I'm using 1 1/2" o.d. .134 wall mild steel for the roll cage. It meets NHRA requirements. JD2 says you can bend 1 3/4" .120 wall by hand, so that seems comparable. All I will have is 1" & 1 1/2" dies. I've watched U-Tube videos of the bender in action. I'm excited to give it a try.
Gastrick, When I built my house I planted 1200 trees and shrubs. I've got crap hidden everywhere and the community "neat police" can't see a bit of it. Even my neighbors can't see anything.


All times are GMT -5. The time now is 07:40 AM.

Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Rat Rods Rule Inc.