Undead Sleds / Rat Rods Rule - Hot Rods, Rat Rods, Sleepers, Beaters & Bikes... since 2007!

Undead Sleds / Rat Rods Rule - Hot Rods, Rat Rods, Sleepers, Beaters & Bikes... since 2007! (http://ratrodsrule.com/forum/index.php)
-   Rat Rod & Hot Rod Talk (http://ratrodsrule.com/forum/forumdisplay.php?f=2)
-   -   What Did Ya Get Done This Weekend? (http://ratrodsrule.com/forum/showthread.php?t=1466)

Gastrick 09-23-2007 09:42 PM

What Did Ya Get Done This Weekend?
 
After reading Rat33's progress report for the weekend, I'd thought I'd start a thread for everybody.

My weekend didn't go as planned and I didn't get much accomplished. The metal supplier was out of the sheet aluminum that I needed to finish my interior panels so I just made the patterns and made some attachment points inside the car for the panels. Not really picture worthy.

My windshield frame came back from the plater but the glass didn't get cut. I installed the frame anyway. I'm pleased with the outcome.

http://img205.imageshack.us/img205/8...23smallrx6.jpg
http://img256.imageshack.us/img256/9...24smallzf2.jpg

We pulled the rusty frames off of my bomber seats and gave them a quick coat of color.

http://img256.imageshack.us/img256/2...32smallvn2.jpg
http://img223.imageshack.us/img223/7...26smallvf6.jpg

There was misc. work on a couple of other projects but nothing noteworthy yet. I'll have to wait until I get further along with those to post.

Tripper 09-23-2007 09:49 PM

Seat time!
 
I cleaned my shop up but the weather was so nice I filled the old Daytripper up, hit the road & got some sun! ; - > I had planned on finishing my top chop up but... I wore my rear out instead. I'll make up for it this week & post pictures... promise!!!

Gastrick,
Did u make those seat mounts?

BoB

24dodge 09-23-2007 09:52 PM

1 Attachment(s)
your car is looking awesome Gastric , I really like that hood........ all I managed to do was buy a couple of dog collars for my tank , (I liked your hood straps) and a whole lot of yard work....

Tripper 09-23-2007 09:54 PM

Quote:

Originally Posted by 24dodge (Post 17397)
all I managed to do was buy a couple of dog collars for my tank

24,
Those look really kool! Dog collars... kool!

BoB

RUSTY50F1 09-23-2007 10:06 PM

I had a pretty good week,(been on vacation) took the Jag ifs off the frame, got the front of the frame boxed, got the rear of the frame boxed. Motor mounts and tranny cross should be here by the middle of the week. Rear Jag cross I ordered should be here soon was mailed on Friday. Like to get it all on the frame by next weekend. Got the Jag Irs ready to put in. One more week of vacation left.(Self-employed just took off) Hope to have a rolling chassis very soon. Sorry for the double post I put it on Don's engine post by mistake.:D:D:D:D

T2T 09-23-2007 10:20 PM

1 Attachment(s)
I picked up a Nailhead...............................

Rat33pickmup 09-23-2007 10:21 PM

Gas, the Frame looks AWESOME and I love the green on the seat bases.

24, you have any close pics of the 1/4 elliptics on the ride in the pic?


Jim

Gastrick 09-23-2007 11:20 PM

Quote:

Originally Posted by Tripper (Post 17396)
Gastrick,
Did u make those seat mounts?
BoB

Yea, I made em Tripper. I did a thread on it. Here.

http://www.ratrodsrule.com/forum/showthread.php?t=314

Great work everybody. That tank mounted there with the dog collars looks real nice 24.

donsrods 09-24-2007 06:18 AM

3 Attachment(s)
Mainly been spending time working on my Son's T. Got the frame etch primed, then shot some surfacing primer on it. Plan is to do some block sanding Monday night and spot putty up the little flaws, then shoot some color on it later in the week.

On my T, I built some baffles for the headers. They seem to have quieted it down a little, and if I need more I will stuff the headers with either stainless steel scrub pads or fiberglass. Also got my stainless steel brake lines in and got them bent up. Just need a couple more fittings and I can wrap up the brakes.

Here is Don's frame in the green etch primer, and my baffles I built.

Don

Tripper 09-24-2007 08:01 AM

Quote:

Originally Posted by donsrods (Post 17421)
and my baffles I built.

Don,
Love those baffles... they look really sharp!!!

BoB


All times are GMT -5. The time now is 06:29 AM.

Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Rat Rods Rule Inc.