Jumpers..making life easier.

Rat Rods Rule

Help Support Rat Rods Rule:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Sniper

Canadian Rust Bucket
Joined
Dec 26, 2007
Messages
1,916
Location
Ontario Canada
This isn't earth shattering, but it's something I've used for quite sometime. Lots of time you need a jumper to check a circuit, or a temporary patch to see if your on the right track etc. The pain in the butt part, is not having the proper ends on a jumper, or just twisting together the bare strands to make do. Make up a jumper with multiple ends. This one has two alligator clips, two male, and two female spades. I have others with different combo's to cover what ever I come across. I've made them about 14 inches long over all, seems to be about right. This one has three leads (6 ends) soldered in the middle with a shrink tube covering. Make them how ever it works best for you and your situation. It just makes life easier. Sniper ;)
 

Attachments

  • Jumper 1.jpg
    Jumper 1.jpg
    13.4 KB · Views: 67
  • Jumper 2.jpg
    Jumper 2.jpg
    18.8 KB · Views: 67
Last edited:

Latest posts

Back
Top