24dodge
One of the Dodge brothers
any of you guys that have an IH truck know the diameter and length of the door hinge pins , are they threaded on the end or smooth ? thanks in advance
34 IH hinge pin DIA>
- Thread starter 24dodge
- Start date
Help Support Rat Rods Rule:
shanesflames
Active member
pin and hinge
Pin mikes out to 0.27 the pin in the top was 3" the bottom 2and2 16ths..just the pin not head..no threads...Shane...
Pin mikes out to 0.27 the pin in the top was 3" the bottom 2and2 16ths..just the pin not head..no threads...Shane...
24dodge
One of the Dodge brothers
Thanks Shanesflames , that helps alot ! .....`24
Bonehead
Skull Master
I dont, know if you picked up on a little trick I did, or if it will work for you. But, I had hinge woes on my build. I used pins out of an old antique house door hinge, you know the ones with the round balls on top. It was a killer look when it was done, most people don't catch it.
24dodge
One of the Dodge brothers
that`ll be a cheap sollution for me , i`ll see if I can find some , thanks for the tip.
