'56 F100 Diff....

Rat Rods Rule

Help Support Rat Rods Rule:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

23crate

Well-known member
Joined
Sep 26, 2014
Messages
1,364
Location
new zealand
need some more info on these diffs. please .....

while at a buddys place picking up a mini roof for my coupe ,, I asked him if he knew of any narrow diffs for sale...

he says yip look at this,, since the tape measure was a decent walk away I didn't measure it.

who could tell me more about these diffs. thinking its low low price (f.o.c)
-- any difference between 6 or 8 cylinder ?
-- like how wide is one from the inside of backing plate to backing plate
-- could I use later falcon / mustang drums etc
-- what axles could be used? - original could be an option -- if not ??

-- possible gear ratios for these ?

looking at attaching a 318 to the sharp end


thanks
crate .....
 
Thanks Guys !!!

excellent and very helpful info !!!!

ill call him tomorrow and discuss it further .. see if I can get the diff and what else ..

could work very well for my project !! :D
 
The rear is a Dana 44 and should have a gear ratio of 3.92. I been awhile since I had one apart but if memory serves me right I think the axle is a 10 or 11 spline. the bolt pattern is 5 on 5 1/2.
 

Latest posts

Back
Top