My 1926 Dodge build start

Rat Rods Rule

Help Support Rat Rods Rule:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
I didn't get a picture of the part I made, it is a piece of 5/8 thick plate, welded inside a piece of 2" pipe, I drilled all the way through the frame, that way I could get to the nut on the tierod end.
 

Attachments

  • 003.JPG
    003.JPG
    147.2 KB · Views: 20
Here is the shocks setup. I am going to run a piece of teflon between the arm and the wishbone.
 

Attachments

  • 005.JPG
    005.JPG
    144.3 KB · Views: 35
  • 006.JPG
    006.JPG
    145.5 KB · Views: 29
  • 007.JPG
    007.JPG
    149 KB · Views: 30
  • 008.JPG
    008.JPG
    144.7 KB · Views: 29
Got the tilt steering column mounted. It is from a 1994 chevy truck.
 

Attachments

  • 009.JPG
    009.JPG
    147.3 KB · Views: 25
  • 012.JPG
    012.JPG
    146.1 KB · Views: 24
  • 013.JPG
    013.JPG
    146.7 KB · Views: 23
Got the tail lights mounted. Here's what She is looking like so far. Just about ready to tear her down to finish welding on the body and frame. See anything I should do different?
 

Attachments

  • 019.JPG
    019.JPG
    134.4 KB · Views: 46
  • 027.JPG
    027.JPG
    131 KB · Views: 43
got everything fitted and back off again to do some final welding on the frame. I hope this will be the last time.
 

Attachments

  • 002.JPG
    002.JPG
    98.3 KB · Views: 11
  • 003.JPG
    003.JPG
    98.5 KB · Views: 10
  • 004.JPG
    004.JPG
    99 KB · Views: 11
  • 005.JPG
    005.JPG
    99.6 KB · Views: 10
  • 006.JPG
    006.JPG
    97.6 KB · Views: 12
  • 008.JPG
    008.JPG
    99.1 KB · Views: 10
  • 009.JPG
    009.JPG
    98.2 KB · Views: 10
welding up the transmission tunnel, need to add some steel on the cowl. I think I have been welding for days now [;)
 

Attachments

  • 013.JPG
    013.JPG
    99.6 KB · Views: 24
  • 016.JPG
    016.JPG
    98.3 KB · Views: 24
  • 018.JPG
    018.JPG
    97.4 KB · Views: 24

Latest posts

Back
Top