MNOutlawCustoms
Member
We have the harbor freight ones and they are decent quality and fast for an amatuer.
Good Luck!
Good Luck!
More tools
- Thread starter Willowbilly3
- Start date
Help Support Rat Rods Rule:
TIMOTHALE
Well-known member
lazze info
Lazze has a couple video's on improving the shrinker stretcher, I bought a shrinker'stretcher at harbor freight, out of box both sets of dies and only one holder for $ 39. I got some 1/2 steel plate from some of our scrap farm machinery and am building a deep throat shrinker body. The HF holder pivot pins are knurled and just press out. I used the one holder for a drill template .I cannot use a coil spring on the deep throat holder. "I took a street rod Fab class at UVU a few years ago and they had a marchant shrinker stretcher, They are the "rolls royce" of shrinkers. the marchant has an adjuster so you can limit the shrink, You can go fast just stomping the pedal, when you are in deeper, then open up the limiter when you get near the edge and want more shrink ,
Lazze has a couple video's on improving the shrinker stretcher, I bought a shrinker'stretcher at harbor freight, out of box both sets of dies and only one holder for $ 39. I got some 1/2 steel plate from some of our scrap farm machinery and am building a deep throat shrinker body. The HF holder pivot pins are knurled and just press out. I used the one holder for a drill template .I cannot use a coil spring on the deep throat holder. "I took a street rod Fab class at UVU a few years ago and they had a marchant shrinker stretcher, They are the "rolls royce" of shrinkers. the marchant has an adjuster so you can limit the shrink, You can go fast just stomping the pedal, when you are in deeper, then open up the limiter when you get near the edge and want more shrink ,
