Hold my juice box and watch this!!

Rat Rods Rule

Help Support Rat Rods Rule:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
I believe I have enough room to do inner Fender Wells on the front also. That way there will be no open Tire or steering arms inside the cab. They will be all closed off. The only thing coming through would be the tie rod. Not really too concerned with weight. I will probably build it out of like 18 gauge and bead roll it to give it some strength. The floors might be 16 gauge and then the inner fenders and stuff could be 18. I've got lots of scrap stuff laying around for other projects so I would not have to buy any for it
 
Where do the pedals go? They should be behind the steering linkage. Maybe reverse the spindles and make it front steer to give more leg room?
 
They go at the very front of the cart. In front of the tie rods. I'll get some pics later
 
Worked on getting brakes mounted today. Nothing to show really just playing stuff out and getting a parts list. But here is a better picture of the hinge system I built for the body
 

Attachments

  • 20181208_155050.jpg
    20181208_155050.jpg
    78.8 KB · Views: 18
  • 20181208_155041.jpg
    20181208_155041.jpg
    92.4 KB · Views: 24
Something like this!
 

Attachments

  • 8658c421e0396d790724c93014158079.jpg
    8658c421e0396d790724c93014158079.jpg
    42.4 KB · Views: 13
This project is long overdue but I've been waiting for some parts to come back into stock so I can do it right the first time. I finally got my miniature rack and pinion steering kit new wheel collapsible steering shaft rack with factual rod ends and a new steering wheel
 

Attachments

  • 0506201859a.jpg
    0506201859a.jpg
    65.6 KB · Views: 20
  • 0506201900.jpg
    0506201900.jpg
    119.6 KB · Views: 18

Latest posts

Back
Top