Blown I 6

Rat Rods Rule

Help Support Rat Rods Rule:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

PA41

Well-known member
Joined
Dec 5, 2008
Messages
872
Snagged some pics from the NTBA where a guy is hooking an mini blower to a 250 Chevy. Looks like fun, and easy to get the motor and blower at swap meets/junk yard. Not sure what intake and belt adapters are needed, but a reg 4bbl intake should work.
 

Attachments

  • 12359889_10205543339768229_2793523053110769175_n.jpg
    12359889_10205543339768229_2793523053110769175_n.jpg
    158.1 KB · Views: 126
  • 12360089_10205543340288242_5042272467626819907_n.jpg
    12360089_10205543340288242_5042272467626819907_n.jpg
    99.2 KB · Views: 134
  • 12366277_10205543339648226_8257028007453154010_n.jpg
    12366277_10205543339648226_8257028007453154010_n.jpg
    95.6 KB · Views: 119
  • 12369180_10205543339888232_4227200103125200268_n.jpg
    12369180_10205543339888232_4227200103125200268_n.jpg
    111.8 KB · Views: 118
Turns out it's Australian and costs a bundle!! Over 5K$ for the kit. It takes a long snout and a special brace to hook the mini blower up. I would seam if a guy fabbed up his own intake and moved the whole blower forward the problem could be avoided and you could use available small v8 parts. Just for thinking about on a dreary winter day. aussespeed I think.
 
I remember a long time ago seeing a few dragsters with the blower mounted low in front of the engine, air piped back to a stock looking manifold

Potvin I think. Good idea if you've got room up front.
 
Aussie Stuff

Cool engine. I have a pal that has a Dodge wayfarer roadster. Put a slant 6 in it with a very interesting cylinder head that he had shipped to him here in Oregon from Australia. :) TLouisJ
 

Latest posts

Back
Top