![]() |
#111
|
|||
|
|||
![]() ![]() my made some new lower coilover mounts I had them mocked up on a extra subframe ![]() tow hook im making ![]() got one made and mounted
__________________
1984/85 B reg rhd classic mini Mayfair with a vtec swap, 1937 Chevy truck |
#112
|
|||
|
|||
![]()
__________________
1984/85 B reg rhd classic mini Mayfair with a vtec swap, 1937 Chevy truck |
#113
|
|||
|
|||
![]() ![]() took the car outside to get a good view of it and to turn it around to work on the right rear fender and rear roll pan ![]() I made a new radiator mount, I put a hole in the alloy rad I had, so I changed to a stock style radiator thats alittle wider then the alloy rad I had so I had to make new lower and top mounts I haven't made a e-fan mount yet, I have a 10 inch e-fan but I was thinking about going with a 12 or 14 inch, but I haven't ordered it yet so I cant run the car to long without a fan
__________________
1984/85 B reg rhd classic mini Mayfair with a vtec swap, 1937 Chevy truck |
#114
|
|||
|
|||
![]() ![]() side exit exhaust, I removed the cat from the exhaust system, 28 inch long cherry bomb
__________________
1984/85 B reg rhd classic mini Mayfair with a vtec swap, 1937 Chevy truck |
#115
|
|||
|
|||
![]()
https://sandiego.craigslist.org/ssd/tls/6688316949.html
I'm in the process of buying this tool, I'm having my brother and dad pick it up for me, and then I will drive out to San Diego in a few weeks to bring it home to Tucson AZ I was looking at a sieg x2, but I think this machine is alittle bit bigger and stronger, and it looks to be in pretty good shape I dont know much about mills, but I plan to use this to learn, have to start somewhere
__________________
1984/85 B reg rhd classic mini Mayfair with a vtec swap, 1937 Chevy truck |
#116
|
|||
|
|||
![]() ![]() found this on craigslist in San Diego, so I had my brother and dad pick it up for me im going to get it in a few days
__________________
1984/85 B reg rhd classic mini Mayfair with a vtec swap, 1937 Chevy truck |
#117
|
||||
|
||||
![]()
Yea, I need one too. I have two 7x12 mini metal lathes. Well, actually, more like 1 2/3 so far.
__________________
39 Ford PU Build. http://ratrodsrule.com/forum/showthread.php?t=36459 The thing about a '39 Ford pick-up is that that ugly grille kinda' grows on ya' after a while. Not taking anything too seriously. ![]() |
#118
|
|||
|
|||
![]()
https://quartertonparts.com/product/...-gallon-paint/
im thinking about going with this paint for the mini some real od green
__________________
1984/85 B reg rhd classic mini Mayfair with a vtec swap, 1937 Chevy truck |
#119
|
|||
|
|||
![]() ![]() I started to build the dash for the mini ![]() ![]() a switch pod im building to hold the stock del sol switches that went above the cluster, im making them mount below the cluster in the center
__________________
1984/85 B reg rhd classic mini Mayfair with a vtec swap, 1937 Chevy truck |
#120
|
|||
|
|||
![]() ![]() the mill, I got it in my garage and set up ive been using it for a few weeks now
__________________
1984/85 B reg rhd classic mini Mayfair with a vtec swap, 1937 Chevy truck |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|