tomtbone
Well-known member
- Joined
- Jun 8, 2018
- Messages
- 51
Here is where i'm at.
Both doors are a 3/16 low at the b pillar.
Shimming may not be an option because I'm channeling the body.
with the hinge pin in the center hinge, I can pivot the door to the proper position.
The lower hinge needs a minimal pinch in, but the top hinge needs to be moved back.
My concern is binding.
Should I just go for it, and bend the hinges on the door?
Thanks.
Both doors are a 3/16 low at the b pillar.
Shimming may not be an option because I'm channeling the body.
with the hinge pin in the center hinge, I can pivot the door to the proper position.
The lower hinge needs a minimal pinch in, but the top hinge needs to be moved back.
My concern is binding.
Should I just go for it, and bend the hinges on the door?
Thanks.