![]() |
|
Builds! Post your project here... show us what you're up to! Please Note: This section is for "Builds" ONLY! |
![]() |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
![]() |
#2
|
|||
|
|||
![]()
Well it looks like that worked. I'll try to post more pics and some more info. this is the wooden mock up frame and the cab and bed roughly in place. the cab is chopped 5 inches with 3 inches out of the rear window. the chop was done with parts from 3 roofs because they were so rotted. the bed was shortened 18 inches. Ground clearance is supposed to work out to 7 inches.
|
#3
|
|||
|
|||
![]()
I'll try to load pics again. it says a security token is missing.
|
#4
|
|||
|
|||
![]()
these pics are of the 2x4x.120 wall tube.
|
#5
|
|||
|
|||
![]()
more pics. truck arms and rear end mounting.
|
#6
|
|||
|
|||
![]()
front cross member,motor mount,frame fish plates in areas of tension under the frame and mounting area for x-member with conduit tubes for plumbing and electrical.
|
#7
|
|||
|
|||
![]()
front and rear suspension and steering.
|
#8
|
|||
|
|||
![]()
oops forgot to add the pics
|
#9
|
|||
|
|||
![]()
cab and bed on frame. still need to cut 3-1/2 inches off bottom of cab.
|
#10
|
|||
|
|||
![]()
fuel tank and mounting. the original plan was to make a fuel tank to fit the opening in the frame but a friend brought this one by and it fits perfectly. it is a 26 gallon tank for a boat. it even has a fuel level sender in it and the price was right,free.
|
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|