1937 Packard 115 coupe

Rat Rods Rule

Help Support Rat Rods Rule:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Finished the bulkhead area and the trim pieces over the doors and front window.

attachment.php
attachment.php
 

Attachments

  • IMG_3139.JPG
    IMG_3139.JPG
    65.3 KB · Views: 61
  • IMG_3141.JPG
    IMG_3141.JPG
    84.9 KB · Views: 60
Got some more done, front kick panels, with a carpet strip, it'll line up with a carpet strip on the door panels.
attachment.php
attachment.php


Carpeted the trunk, found some marine stainless finger pull thingies to lift the lids to the storage compartment and battery.

attachment.php
attachment.php
attachment.php
 

Attachments

  • IMG_3151.JPG
    IMG_3151.JPG
    112.7 KB · Views: 37
  • IMG_3153.JPG
    IMG_3153.JPG
    100.5 KB · Views: 38
  • IMG_3154.JPG
    IMG_3154.JPG
    89.9 KB · Views: 38
  • IMG_3155.JPG
    IMG_3155.JPG
    96.7 KB · Views: 39
  • IMG_3156.JPG
    IMG_3156.JPG
    87.5 KB · Views: 38
Finished putting in the carpet today, the front section is held down with velcro strips on the edges so it can be lifted up to access the master cylinder. Also made a matching brown boot for the shifter. I HAD the door panels finished and installed but fell victim to a noob snafu - forgot to allow for the thickness of the material around the edges, especially the carpet strip along the bottom :mad: Too close to the door openings, trying to pull the windlace out and pop the front kick panels off, could barely close the doors:(. No good! Had to undo the stapled edges and cut 1/8 to 1/4" off all around - oh well, I'll know better next time. Also messed up a bunch of the nylon push pins that hold the panels on so I'm waiting for more from Scamazon...

attachment.php
attachment.php
 

Attachments

  • IMG_3182.JPG
    IMG_3182.JPG
    102 KB · Views: 56
  • IMG_3183.JPG
    IMG_3183.JPG
    103.5 KB · Views: 56
Looks great.
You will get it...
As I’m laying out the channeled floor in the Dodge I was thinking allowances for door panels and such.
Much to consider.
Torchie
 

Latest posts

Back
Top