Master cylinder for our '41 Pontiac

Rat Rods Rule

Help Support Rat Rods Rule:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

thom

Well-known member
Joined
Feb 25, 2009
Messages
132
Location
western NC
I've mocked up a cylinder on our Pontiac. I'll probably use a smaller one though. I'll make the mounting bracket using the two holes where the original cylinder mounted, under the new cylinder in my pics. The pedal will clear on the engine side and the lines clear on the frame side. The pushrod will require a slight dogleg.
 

Attachments

  • IMG_20211123_155527239_HDR.jpg
    IMG_20211123_155527239_HDR.jpg
    122.3 KB · Views: 24
  • IMG_20211123_155203890_HDR.jpg
    IMG_20211123_155203890_HDR.jpg
    117.6 KB · Views: 23
I've got the bracket made, just gotta finish welding, clean, and paint.
I now have an 80's Chevrolet truck (1/2 ton 2wd) rear axle assy to use, so as soon as I get it installed I'll rebuild all the brakes, including all new metal & rubber lines. The brakes will be finished.
 

Latest posts

Back
Top