Recent content by 35chevypu

have had real good luck with pertronix complete distributors,or if you have money either msd or mags-r-us hei.

deep woods off and old sock or washcloth works wonders. Soak washcloth or sock and just rub into headlight. you might be surprised. Also there's a trick with acetone and an extremely fast wipe but your on your own on that one I don't want to be responsible for you melting your plastic lenses

have one myself.have not used it yet but hooked to vaccum pump to check operation.pretty sweet

ive thought about this also and thought of making a giant ring roller with a big bottle jack to make the radius. possible some track rollers from a piece of heavy equipment or?? just a thought.

i have had success with the car running windows up heat on full fan high heat,shut doors and spray all gasket and window seams with soapy water and will bubble where leak is learned this from a 15 year dodge tech.hope it helps someone

wire the red wire from the flat 2 wire plug to large post on back of alt. then wire smaller white wire in the 2 wire plug to a 12volt power when key on source.the large post can be wired either directly to battery positive or to power feed to starter whichever is easier or cleaner to do

another good use is for an easy out on butt welding panels i overlap them tack in a few spots and then use it to cut along seam. it leaves the perfect width gap for butt welds.

i would like to know this also as i have a 31 axle that m looking to put 52 spindles and drums on to get juice frt brakes.

just a little advice with that bed ether put about a 1/4 inch of rubber undercoat in rear wheelwells or get the roll water and ice shield roofers call bitchathane and line them. otherwise the tires will launch rocks out and hit from underneath and pop paint or primer off the outside. this...

http://www.killbillet.com/showthread.php?t=5146

definitely works used it on race cars also never a burnt wire in 4 years

new volvo turbo? keep it all volvo just to be different