Bogeyman build continuation

Rat Rods Rule

Help Support Rat Rods Rule:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Bonehead

Skull Master
Joined
May 11, 2007
Messages
12,303
Location
Fruita, Colorado
Probably the longest build on this site. I started this build many years back. The build was commissioned, as a work on it as I had the time kind of build. And my time got super occupied. Since I started this build, I built the SEMA Jeep, TOXIC. I also built Sinister Sally for my Brother. I just worked on a big house project in Aspen for two years. But on top of that my Art career took off in a major fashion. I have done some monumental large sculpture pieces for public art, and am currently working on a very large sculpture project. But I have been feeling bad about not getting work done on the 50 Willys truck, Bogey Man. So the owner from out of state, and I , came up with a plan where I would take a week off from everything else, and he would come and help with the project. So we spent the last week working on his truck in my shop. As you may recall, this was a 50 Willys that I had gathered up years before as a potential build. Custom chassis, 4 link rear, coils, disks, One ton axles, but no longer 4x4, but a narrowed 14 bolt rear, 472 Caddy. Turbo 400, 3 inch chop in the front, 5 inch chop in the rear. (yes that is right), and a removable hard top.
 

Attachments

  • boogeyman on lift.jpg
    boogeyman on lift.jpg
    184.1 KB
  • boogeyman front.jpg
    boogeyman front.jpg
    207 KB
  • boogeyman hood.jpg
    boogeyman hood.jpg
    177 KB
  • boogyman top.jpg
    boogyman top.jpg
    272.6 KB
  • boogyman roof.jpg
    boogyman roof.jpg
    213.8 KB
  • boogeyman brakes.jpg
    boogeyman brakes.jpg
    2.5 MB
details
 

Attachments

  • boogeyman dash 1.jpg
    boogeyman dash 1.jpg
    137.4 KB
  • boogeyman exhaust.jpg
    boogeyman exhaust.jpg
    175.3 KB
  • boogeyman fire extinguisher.jpg
    boogeyman fire extinguisher.jpg
    159 KB
  • boogeyman headers.jpg
    boogeyman headers.jpg
    153.4 KB
  • boogeyman intake.jpg
    boogeyman intake.jpg
    147 KB
  • boogeyman rearend.jpg
    boogeyman rearend.jpg
    177.4 KB
more details
 

Attachments

  • boggie man rear fenders.jpg
    boggie man rear fenders.jpg
    2.3 MB
  • boogie man fenders top.jpg
    boogie man fenders top.jpg
    2.3 MB
  • boogy axle.jpg
    boogy axle.jpg
    1.9 MB
  • boogyman rear.jpg
    boogyman rear.jpg
    124.8 KB
  • willys flare die.jpg
    willys flare die.jpg
    1.5 MB
  • willys fire wall.jpg
    willys fire wall.jpg
    2.1 MB
more details
 

Attachments

  • boogeyman a side.jpg
    boogeyman a side.jpg
    2.4 MB
  • boogyman a outside.jpg
    boogyman a outside.jpg
    3.4 MB
  • boogyman a side.jpg
    boogyman a side.jpg
    3.4 MB
  • boogyman a visor.jpg
    boogyman a visor.jpg
    1.8 MB
  • boogeyman a headers .jpg
    boogeyman a headers .jpg
    3 MB
Okay gang, I finished my part of this build, now the owner will add electric, and plumbing. He brought his trailer, and hauled it off today, after we worked on it the last few days getting all the little details done. This was a really long project. As you recall, I started from scratch and built the frame, and modified a Willys body by chopping, channeling, stretching, and making it a hard top convertible. This one is purposely a little on the rough side. The 472, with turbo 400, and narrowed 14 bolt rear end completes the drive train, and a 10 bolt 4x4 front axle with the center section removed is what's up font. Vega box steering, and custom linkage, and wheel. My first skull shifter set up for a Lokar shifter. Lots of details including the center tunnel with Boogyman hand reaching out, and another Boogyman on the front, and rear end cover. The front radius arms, ( hairpin style) , have actual arms on them, (Made from steel). Coil overs all the way around with a triangulated 4 link in the rear, and Panhard bar front. Right now, I feel like this is my last build for somebody else, I have a stack of builds lined up for me, but have not had the time. I have a frame to build for a friend of mine, but nowhere near a full build. My Artwork has really taken off, and I am staying very busy with that right now. If I start anything, I will let you guys know. Photo dump below.
 

Attachments

  • willys steering wheel final .jpg
    willys steering wheel final .jpg
    178.2 KB
  • willys side .jpg
    willys side .jpg
    306.1 KB
  • willys tailgate final.jpg
    willys tailgate final.jpg
    272.9 KB
  • willys interior side open door .jpg
    willys interior side open door .jpg
    276.1 KB
  • willys tunnel final .jpg
    willys tunnel final .jpg
    177.5 KB
  • willy bracket.jpg
    willy bracket.jpg
    168.4 KB
  • willys steering setup .jpg
    willys steering setup .jpg
    271.1 KB
  • willys steering.jpg
    willys steering.jpg
    184.1 KB
  • willys radiator .jpg
    willys radiator .jpg
    274.7 KB
  • willys hood.jpg
    willys hood.jpg
    257.1 KB
That turned out just great BH. So many details to appreciate, and I'm sure the pictures don't do them justice. Well done! Good luck with all your future projects.
 

Latest posts

Back
Top