Search results

Trans mount Thanks skip and Kenny but for your question skip there is actually a lot of room in between the crossmember and the trans I'm thinking there is enough room for the trans to come out still but to be safe that's why I built the trans mount so wide cause I'm gonna Put the bolts wide...

Trans mount Just need to drill a few holes and its done

Yupp That's right old iron if you look at the plate it has two square ears on the side that are gonna be drilled for bolt holes and bolt to the cross member .

Hudson 👌🏽👌🏽👌🏽

Trans mount Ok so getting my trans mount done out of 3/16 plate. This is the progress so far and a pic of how I ghetto centered my trans hahahah

Heads Yeah willowbilly from what I've researched I can reach about 9.5:1 with my 86 460 and dove c heads with my stock pistons but that's just what I have read and have no prior exsperiance with these 460 motors and there little tricks for more power

Yeah 37 coupes all the way ! Maybe our rides will be able to cruise together one day .

Cleaning it up Trying to save it with out boreing the cylinder this is how it looks so far

Motor problems So I pulled the trans about a month ago and the motor turned completely free and nice cause I turned the motor to get to the converter bolts well I went to turn the motor over when I installed the motor in my rat and it was froze smh . Well this is what happend and I don't know...

Different welds People think mig is the easiest cause you just pull a trigger but just understand that mig will lay down a weld with out proper penitration so with practice on adjusting proper settings and hand movement you can drop some nice welds pretty easy . Tig on the other hand is more of...

Welds I have welded for a living and am certified for mig and tig light gauge metal and went thru the whole corse on stick welding . I've seen people posting on how they weld thick metal with multi passes and tapered edges with a 110v . Just my opinion and how I roll is I wouldn't trust a 110v...

Boxing in the frame Ok so I cut out the cross supports and boxed in my frame with 3/16 plate that I had to cut to fit cause the frame gets taller towards the front and smaller towards the rear . I was not gonna box it in and just leave the stock crossmemeber but I decided to go this route and...

Motor mounts Motor mounts tacked up . Hand made with 3/16 plate and a hand grinder still need to work the top plate a little just for visual purposes

Measuring the carb and then the out put shaft Yeah seriously that's why I was asking it's like the carb is kicked at an angle stock by a decent amount if I would put it level it makes the valve covers look angled downward towards the back and it's all stock out of a 1986 Ford F-250 that came...

Dr crankinstein When I put the angle finder on the flat surface of the carb the angle of the carb is at about 2 1/2 degrees tilted forward front of the motor down im not saying the front of the motor is down I'm saying the angle of the carb is nose down. And when I put the angle finder on the...

Trans angle Trans angle is about 2 1/2 down at the output shaft of the trans bammaman

Small foot my understanding is if the pinion angle is at 2 1/2 down I can just put the pinion angle of the rear end at 2 1/2 up making them basically parallel right and there won't be any vibrations . I have a triangulated four link in the rear that is tacked in that I can adjust the angle...

So I have my motor and trans set at a certain look that I desire but the carb isn't level and the trans is at about 2 1/2 degrees but I like the look of the motor sitting where it is . So the question is what problems will I have if I let it sit right where it is and make the motor mounts? The...

Motor mount 3/16 plate still have some cutting and fine tuning and also boxing it in to make it stronger and better looking but that's the just of it

Scrub line And for the scrub line torchie it has a custom step up to lay frame in the back and is gonna have bags so it's made to lay frame on the ground but the motor pan and trans do not hang lower than the frame actually nothing hangs lower than the frame