Search results

thanks, Dr C. yeah could have gone a long time without seeing the scoop. just don't look right. but then again it probably never goes anywhere unless it's in a trailer.

I've seen this back-end picture a bunch of times. does anybody have a side or front shot of this car???

I,ve seen this back-end picture a bunch of times. does anybody have a side or front shot of this car???

this canned gas BS is the biggest rip-off yet. anybody buying it deserves to get shafted, $9.00 a quart is way out of line, but marketing has so many people f-----ed in the head it's unreal. years ago we had one 10w40 oil on the shelf in our shop, now you have to have 20 varieties of the sh!t...

most of the ProForm SBC pumps have a tab to close off the bypass port, see picture here: http://www.ebay.com/itm/PROFORM-Blue-Aluminum-Electric-Water-Pump-Kit-Small-Block-Chevy-P-N-66225B-/231879054722

if you have a lot of pedal travel, adjust the rear drum brakes until you can't turn the wheel, and then back each one off about 6-8 notches. this will insure you are not wasting a lot of pedal travel taking up slack brakes.

as long as you have the MSD box already, give it a whirl, if it works, great, if not you can always buy a mag. MSD's love big voltage, when I ran mine, I had a big battery in the trunk and a 100 amp alternator a local electric shop made into a one wire alternator that charged full blast any...

most people run mags in blown applications because they lack a alt/generator and an on board battery. if you have the voltage, the MSD 7AL puts out enough spark volt to light any gas powered car. I would invest a dime and call the boys at MSD and see what they suggest.

hate to put a damper on this project, but have you measured the outside width of the new frame compared to the body width in the cowl area? trucks from the 40's are quite a bit narrower than the modern frames, and end up with a front tread width that makes front tire turning headaches.

every time I see cars of those descriptions, I can hear "Send in the Clowns", playing in the sound track of my life.

you want us to work that hard to tell you what wheels they are??? link up some pictures and we might help out, but you gotta do the work.

Hemorrhoids acting up again??

this is what you want: http://www.napaonline.com/napa/en/p/KW_401612_0006406066

Bob, what size jack is that??

look at tri-5 fenderwells or buy a kit and build them to fit.

I think the key word there is "crazy".!!!!!

one hella photoshop job, look at the distorted rear diff cover and the top of the tire would be above the deck lid.

I'd check the ground water for hallucinogens!!!!

look for a pan and oil pickup tube from a Bronco or pickup they should be rear sump.

OOOOOOeeeeeeeee!!!! that shore is purdy!!!!