Reply to thread

Help Support Rat Rods Rule:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Message

I didn't go the same route on mine so I didn't comment. My 31 is set up with a Model AA front section of frame spliced onto a Jeep CJ/Dj frame. Front axle was from f100 and I control steering thru a 73 Gremlin Saginaw steering box mounted on the inside of the frame with a huge bracket which stiffens my frame at the steering box area and the jeep frame is partially boxed midway of frame. Running 350/350 and no problems .

[QUOTE="smallfoot, post: 572991, member: 18431"] I didn't go the same route on mine so I didn't comment. My 31 is set up with a Model AA front section of frame spliced onto a Jeep CJ/Dj frame. Front axle was from f100 and I control steering thru a 73 Gremlin Saginaw steering box mounted on the inside of the frame with a huge bracket which stiffens my frame at the steering box area and the jeep frame is partially boxed midway of frame. Running 350/350 and no problems . [/QUOTE]

Verification