My next project.

Rat Rods Rule

Help Support Rat Rods Rule:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Willowbilly3

A *real* tin magnet
Joined
Dec 10, 2007
Messages
7,847
Location
Black Hills South Dakota
60Ford2-1.jpg


Lots of different ideas on the build but it's next up on my list. I've got a gig that will keep me busy most of October but it's getting to come down to the garage area this week. The patina definitely stays. The 2 favored plans are
#1; keep it simple, install a good running 292 I can get for $100, go through all the brakes and get the glass in it.

#2 would be a different front, most likely an Aerostar, drop in a 302/C4 I have and Exploder rear end. Flip the front spring hangers to lower the rear, maybe a little C-notch if necessary. Or it could go with stickshift if I can fit the power brake next to the clutch cylinder. Except for the Areostar front, I have all the parts to do that, stickshift is in an 80 F100, the cast iron toploader 3 + OD style.
 

Latest posts

Back
Top