Ranger Master cylinder?

[Bamamav]

Anybody happen to know if a 99 Ford Ranger master cylinder has standard or metric threads on the outlets? I have access to one I am thinking about using on the Lincoln if it has standard threads.

 

[Sam_Fear]

If you'll be making new lines anyhow, just snag the ends off the lines also.

 

[Bamamav]

I was planning on using the pre- made lines so I wouldn't have to flare any. I don't have the double flare tool, and have never used one. May end up buying one though and learning. Just trying to save a buck or two and use what I have access too.....

 

[Sam_Fear]

Can you get pre-made with the right fittings on both ends? Double flaring isn't too bad with the tool. I got a set from NAPA and a month late HF started selling the exact same kit for 1/3 the price - Doh!

 

[Bamamav]

Speedway sells pre made lines with fittings on both ends.

 

[cfavrett]

I bought a double flare tool and 20 ft of brake line from O'rileys for 40 buck. They have the flexible stuff that is way easier to bend. you can bend it without a bender and it wont kink. Its amazing stuff. The tool comes with instructions. Its very simple after you practice on a few.