Reply to thread

Rat Rods Rule

Help Support Rat Rods Rule:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

I'd bet the plastic gear teeth are stripped on the governor thing at the rear left side. Pop the rounded cover off, slip a new one in, away you go.


You don't need to use a kickdown cable with this tranny, but it sure make sit more fun to drive if you do have one installed and adjusted correctly. Without the cable it will upshift at about 3500 rpm max, when floored, but with the cable fitted and the throttle slammed it'll hold each gear to 5000rpm, which makes it far 'livelier'. :D


Back
Top