31 model a measurement needed

[patina]

looking for windshield height for a 31 model a Stock height or choped height and how much chop.
I dont think i t would matter if its a truck/coupe/or sedan.

Thanks Jason

 

[earthman]

Stock 15 1/2 inches outside edges of the frame on the ends of the windshield. Can't tell you how much to chop it.

 

[bob w]

I trudged through snow up to my buttocks, out to the back garage and measured too. Same as E-man, 15 1/2" outside edges. 13 3/4" in the middle of the windshield. Exposed glass is 14 1/2" edges and 11 3/4" in the middle.

 

[earthman]

Or maybe it was 15 3/4? Are you sure it was 15 1/2 Bob? Would you mind trudging back out there and checking again? I'd go check mine but i have to flip the burgers on the BBQ.

 

[jduffy01]

Since you guys are measuring your 31 model A's, I need to know the measurements of the body. Mine was chopped and if I decide to patch it I need to know how much was chopped off. This is what I need.

 

[earthman]

JDuffy
The bottom of the beltline to the bottom of the body on my sedan is
22 1/2 inches.

 

[jduffy01]

Thanks

 

[patina]

Thanks guys