Hey guy's I gotta new project , I've been working on it for the last few months. It's a 51 chevy 3600 dump bed truck , I pulled it off the original frame and put it on a mazda b2000 truck frame . I put a chavy 350 with a muncie 4 speed tranny in it. So far so good not a whole lotta problems just a whole lotta time and cutting . I have some pics and I'll keep ya guy's posted as new progress happens .
51 chevy truck build
- Thread starter barebones
- Start date
Help Support Rat Rods Rule:
Got Rust?
Well-known member
Nice pictures, truck lookin good, gray box on the back may need to be bigger, justa thought. keep us posted.
first time rollin
no brakes or exhaust just alot of manliness ! http://www.youtube.com/watch?feature...&v=ZUBbPwdXnt8
no brakes or exhaust just alot of manliness ! http://www.youtube.com/watch?feature...&v=ZUBbPwdXnt8
It's been a while since I put more pics up so here they are. I put my engine gauges and main power in my tranny tunnel got brakes working and picked up a bed the other day and cut it to fit my truck. I also made another video of my ride after the video I had to cut off about two inches off the bottom of my front fenders so I wouldn't drag the ground
http://www.youtube.com/watch?feature=player_detailpage&v=WnYlXmPw0no#t=1s
thanx mark
http://www.youtube.com/watch?feature=player_detailpage&v=WnYlXmPw0no#t=1s
thanx mark
Attachments
Neverdone
He's not done yet...
leave the paint alone!!! Too many out there flat black!!!! Love the visor by the way...........
earthman
Fascinated by rolling objects!
You could wet sand that body with some 100 grit to give it less of a crusty and more of a well worn look.
Best achieved on a warm Sunday afternoon with music and suds. It could be a zen experience.
Best achieved on a warm Sunday afternoon with music and suds. It could be a zen experience.
fuel tank vent tube question
Hey guy's I have fuel tank that I'm using on my ride . My question is I need to set up a vent tube . On the cap I have a vent port ,my problem is I don't mind the vapors escaping into the air but I don't want people smelling it at a car show,not cool. Where can I run a hose to and would I need to put a charcoal canister to hide the smell. On my prior project I ran a hose to the passenger rear fender but I could still smell gas on a hot day . Any suggestions???
Hey guy's I have fuel tank that I'm using on my ride . My question is I need to set up a vent tube . On the cap I have a vent port ,my problem is I don't mind the vapors escaping into the air but I don't want people smelling it at a car show,not cool. Where can I run a hose to and would I need to put a charcoal canister to hide the smell. On my prior project I ran a hose to the passenger rear fender but I could still smell gas on a hot day . Any suggestions???
