Mutt's37Buick
Well-known member
I'm adapting the gas tank from a 95 B-Body (Roadmaster) for use in my 37 Buick Roadmaster for EFI with my LT1 engine.
I have read that the fuel pumps in these tanks can overheat if you do not keep at least 1/3 full. Also possible to starve pump in fast start or stop.
The Camaro pump assy has a return line that feeds a can around the pump which would keep the pump cool and prevents fuel starvation (Picture on left is 95 B-body and picture right is 95 Camaro.
1) Does anyone know if a 95 Camaro Fuel Sender/Pump assy will bolt in place?
2) Has anyone done this?
Thanks
I have read that the fuel pumps in these tanks can overheat if you do not keep at least 1/3 full. Also possible to starve pump in fast start or stop.
The Camaro pump assy has a return line that feeds a can around the pump which would keep the pump cool and prevents fuel starvation (Picture on left is 95 B-body and picture right is 95 Camaro.
1) Does anyone know if a 95 Camaro Fuel Sender/Pump assy will bolt in place?
2) Has anyone done this?
Thanks