MercuryMac
Builder Junky!
Here are two jacknife tips. Neither one is hot wiring your starter solenoid. One, if you can get the plastic lid off your rattle can paint bomb, successfully, the first time, get out your jacknife and cut a slit in the inner circle like [pic 1]. It will go back on easily ,stay on, and pop back off nicely.
Two, if you are trying to put a nut on a short bolt that you can't reach the head of, you can whip out your jacknife and install the blade into the furthest thread that you can see, from your end of the bolt. Your knife will hold the bolt solid until you can get the nut started on. [pic 2]
Two, if you are trying to put a nut on a short bolt that you can't reach the head of, you can whip out your jacknife and install the blade into the furthest thread that you can see, from your end of the bolt. Your knife will hold the bolt solid until you can get the nut started on. [pic 2]