first build model a

[Neverdone]

glad to see ya moving on this again! Welcome back!

 

[Snake Farm]

Yep, always good to see a flame rekindled! Keep us posted on your progress.

 

[stealnart]

got my axle from speed way and put it together, wondering how I make sure to get everything straight in the front before I start welding

 

[stealnart]

also wondering how you guys setup and chevy motor and trans with a ford rear end

 

[dmw56]

I can't tell for sure by the pictures but are the calipers on the right sides and the right way up?
The bleeders should be pointing up and be on top.

 

[stealnart]

ahh crap I thought I had my Left and Right on the correct sides... L on the drivers side?

 

[dmw56]

Mine were in the back like this:

 

[Neverdone]

also wondering how you guys setup and chevy motor and trans with a ford rear end

No big deal. You will almost certainly need a custom drive shaft, in which case all you do is tell the shop what you are putting it on and they will fix ya up with the right yolks. Then pound in the U joints and you are ready.

 

[stealnart]

Got my brakes fixed at front ax on

 

[Bump Stop]

I hope the holes in your frame don't whistle at speed.

 

[Neverdone]

never know might end up being a catchy tune!!!