2.3Turbo_T
Well-known member
Found a cheap way to make a stationary bandsaw for cutting plates for brackets and such. Items required are a stick of 1" square tubing and a $2 garage sale 3-1/2" vise.
$2 vise.
Fabbed up a base.
Made a support bar.
Mounted the vise.
Built the table structure.
Table top scrounged from dumpster at work. 1/8" steel.
Mounted the table top.
Chucked my 6230 in the vise and wahlah...........instant stationary bandsaw!
$2 vise.
Fabbed up a base.
Made a support bar.
Mounted the vise.
Built the table structure.
Table top scrounged from dumpster at work. 1/8" steel.
Mounted the table top.
Chucked my 6230 in the vise and wahlah...........instant stationary bandsaw!