05snopro440
Well-known member
Hey guys, I have some questions about assembly of my I-beam axle.
- Does the axle have a front and back side? I used my angle finder, the king pin bosses have a very slight rearward tilt so I assembled it so the top of the axle tilts toward the back of the car. Is this right?
- Do you usually have to ream the spindle bushings when you have all new parts?
- How tight should the king pin be in the axle?
- My hairpin/shock mounts don't key to the axle or the perch pin. Has anyone xperienced any problems with these brackets turning?