Raw

[Pookie Bros]

Say someone wanted to skoot with all bare metal, what is a durable clear )gloss- satin or flat) to spray for protection?

thanks

 

[old skool ray]

would love to see more pics of you avitar truck,, the one with dual stacks,,, cool lookin,,, Ray

 

[Pookie Bros]

It's our project 38 Dodge. That was a mock up before the chopping and slicing.... We'll save that for another thread.

No clear?

 

[Bonehead]

Krylon makes some. I am sure many more do to. There are guys that use oil. There are enamels, acryics, and now some water based,(not sure how that works). Most come in gloss, or matte.

 

[Blue Eyed Devil]

No paint is going to protect it. The clear won't bond with bare metal and it will only wind up rusting underneath it, flaking and looking like hell. It is also a pain in the ass to get it off when you move on to better things. You're better off with a scotch-brite pad and some WD-40...

 

[Rat_Coon]

maybe try a nice coat of PB blaster...it stays where you put it...just don't try to lean on the metal.

 

[Yodaforce]

I would try some PPG omni clear over it after sanding it with 400 grit DA. I don't think you could leave it parked out in the sun everyday because the reflective heat from the metal would bake it off from the metal up. I think if you keep it in a garage when you're not out driving it, it should actually last quite a while.