Here is my sheetmetal brake,has a full 5 feet capacity. Simple design and construction , the clamping angle is tightened down with the threaded handles at the ends,so its very easy and precise to line stuff up.It can also easily be removed to use other pieces of metal to clamp stuff for custom applications. Cost me about $ 150 in materials.
![brake 001.jpg brake 001.jpg](https://cdn.imagearchive.com/ratrodsrule/data/attachments/43/43689-32c7f2fda0c34f87d6e647c55b16cc49.jpg)
![brake 002.jpg brake 002.jpg](https://cdn.imagearchive.com/ratrodsrule/data/attachments/43/43690-20be3be71e8dae99c99294040dd61138.jpg)
![brake 003.jpg brake 003.jpg](https://cdn.imagearchive.com/ratrodsrule/data/attachments/43/43691-8b67e6747a05c7f1a3170575b429db92.jpg)
![brake 001.jpg brake 001.jpg](https://cdn.imagearchive.com/ratrodsrule/data/attachments/43/43689-32c7f2fda0c34f87d6e647c55b16cc49.jpg)
![brake 002.jpg brake 002.jpg](https://cdn.imagearchive.com/ratrodsrule/data/attachments/43/43690-20be3be71e8dae99c99294040dd61138.jpg)
![brake 003.jpg brake 003.jpg](https://cdn.imagearchive.com/ratrodsrule/data/attachments/43/43691-8b67e6747a05c7f1a3170575b429db92.jpg)