Search results

Here's hoping you kick the cath soon, and get that Bantam on the track!! oh yeah!! drink lots of tomato juice!!

sounds like some time in it's life, it got slid into a curb a bit.

went back to beginning of this thread and read all the way through and see no mention of the model of your automatic trans. TH350, TH400, 200r4, or 700r4?? all except the TH400 are equipped with a kickdown cable, not only do they act as a "down shift one gear" when the gas pedal is pushed to...

build a figure eight track and get filthy rich.

that's because back then we didn't buy that foreign sh!t, we bought Murican made stuff.

looks like it would clear better if moved to the top of radiator. also that looks like a pusher fan, does it pull the air through the radiator?? also i would build a shallow shroud so it pulls air though the whole radiator. or mount up a light fiberglass fan to the water pump and build a...

if it over heats in 2 blocks of driving, it has to be crack somewhere. combustion gasses are the only way you can overheat the cooling system that fast. or you have one big A$$ air pocket in the cooling system.

Thanks a lot, I just ruined my last pair of clean underwear!!!!!!

that shore is purdy!!!!!

Google it or: http://static.summitracing.com/global/images/instructions/700r4%20cable%20adjustment%20instructions.pdf

TCI and a lot of trans. companies make a reasonably priced control kit for the 700r. also it uses a TV Cable that HAS to be adjusted very close to spec or the forward clutches will be toast.

it's true on a Chevy engine the bottom of the distributor is part of the oil galleries. look at the body bottom there are two rings forming a groove that plugs the leak in that area, some very high end dist. even come with 2 o-ring grooves for a super tight seal. a straight rod will oil the...

supposed to be a lot of this type info here: http://www.fordbarn.com/forum/

free is good. but let's call them what they are, you have 2 pieces of fuel line either 5/16od or 3/8od, and yes it is safe to join them with compression type fittings as your fuel pressure will not exceed the 300psi working pressure of the compression fitting. but you should NEVER use...

somewhere in the late 70's early 80' all the carb mfg's changed to reverse idle mixture screws, and limited how rich they could go. the later idle screws actually meter the air mixed with gas through the idle air port. turning the screws in will richen (less air) the mixture while backing them...

pictures, damn it, have to see pictures!!!!!!

here you go biggest Corvette re-cycler in the world: http://www.tracyvette.com/frames.html

I've seen wiring pictures like that before, from India, the locals just shinny up there and hook up their own cable and phone lines. so many people do it and don't have the money to pay, so the companies have given up disconnecting them and just shut the service down for whole city blocks at a...

look at E150 Ford vans from 1993 up, they have the longest rear axles.

almost all corvette frames are rusted somewhere, had a 64 and sold it as the frame was like swiss cheese. I read some where that you can still by bare frames from Chevy and the price is not totally nuts.