Neverdone
He's not done yet...
Looks very nice!!!
1927 Tribute Woodie-Built Dad`s way
- Thread starter rex1927
- Start date
Help Support Rat Rods Rule:
christcrusader13
Zip-Tie Mechanic
that's a chunk of work it looks awesome!
rex1927
Well-known member
There goes most of the top.
My brother and I cut it out yesterday.Spent the rest of the morning at planer getting lumber ready.
We are going to do a little more today and then I will probably wait until next week to continue.
It is his fall week off,so we need to spend a little time hanging around the marinas,etc,before his wife get`s off for for weekend.
My brother and I cut it out yesterday.Spent the rest of the morning at planer getting lumber ready.
We are going to do a little more today and then I will probably wait until next week to continue.
It is his fall week off,so we need to spend a little time hanging around the marinas,etc,before his wife get`s off for for weekend.
Attachments
rex1927
Well-known member
The reason I cut top out was because I just thought it would look cooler and it would be neat to see interior when standing beside car.Plans are to end up with top about shoulder high when car is done.Thats the plan behind the madness of cutting up this nice body.
Anyway,we got the ERC around bottom of opening today.I decided to use finish washers on just this part.The face and top will be plugs over fastners.Took a few photos before and after Varnishing what we got done today.
Pictures taken in that shop always look bad.[S
Guess it could use some more lights,but doubt if ever gets them.
Probably be next week before I do anything else.
Thanks Guys
Anyway,we got the ERC around bottom of opening today.I decided to use finish washers on just this part.The face and top will be plugs over fastners.Took a few photos before and after Varnishing what we got done today.
Pictures taken in that shop always look bad.[S
Guess it could use some more lights,but doubt if ever gets them.
Probably be next week before I do anything else.
Thanks Guys
Attachments
rex1927
Well-known member
Getting Closer
Got some work done on my roof surgery yesterday and today.
I got the face pieces on.It took 8 hours to plane,fit,sand and install them.
My late Father always said "Do your best and it just might be good enough" so I am trying for perfect fits everywhere. But man it eats up time.
Hope to do more work maybe tomorrow or next day.
Next is the cap and it is going to be pretty hard and time consuming the way I want to do it.
But that`s the way Dad would have done it,and this is his tribute car.
Here are a couple pictures.
More to come as I go along.
Got some work done on my roof surgery yesterday and today.
I got the face pieces on.It took 8 hours to plane,fit,sand and install them.
My late Father always said "Do your best and it just might be good enough" so I am trying for perfect fits everywhere. But man it eats up time.
Hope to do more work maybe tomorrow or next day.
Next is the cap and it is going to be pretty hard and time consuming the way I want to do it.
But that`s the way Dad would have done it,and this is his tribute car.
Here are a couple pictures.
More to come as I go along.
Attachments
earthman
Fascinated by rolling objects!
................................
GJunktionMike
Something's wrong with that boy!
Looking good, going to be an awesome woodie.
Neverdone
He's not done yet...
^^^ He said woodie!!!
rex1927
Well-known member
Finally got a little work done today.Dad`s old planers knife switch shorted when I turned it on,but I clamped it with vicegrips to get done.Foolish thing to do,but I have not had a good 220 shock in a while ,so went for it.
I finished up the cap on roof a couple weeks ago.Was planning elaborate one,but my brother said keep it flat.And he was right.It looks great.It just needs final sanding.Will have to be moved back outside for that.Probably next spring.
Today I worked up some ERC for the interior.Hope to finish interior framing before cold weather.
Will post pictures when I can.Been using my brothers camera to take pictures and his wife has it full.Will post some when she unloads hers.
Thats it for now.
I finished up the cap on roof a couple weeks ago.Was planning elaborate one,but my brother said keep it flat.And he was right.It looks great.It just needs final sanding.Will have to be moved back outside for that.Probably next spring.
Today I worked up some ERC for the interior.Hope to finish interior framing before cold weather.
Will post pictures when I can.Been using my brothers camera to take pictures and his wife has it full.Will post some when she unloads hers.
Thats it for now.
bob w
Still crazy after all these years!
I'm very impressed by the woodwork as I am totally incapable of making anything decent out of the stuff.
Wish you could work on it more.
Wish you could work on it more.
rex1927
Well-known member
Pictures
Top cap is done except for installing large 2 inch plugs.I have them made,but my brother is going to do final cut tomorrow at the marina.They have a saw to split them without danger of losing a finger.Then I just glue them in.
I got framing fitted around rear opening today.Using brass screws and just sinking them flush.It will look great when interior is varnished.Some of the real old yachts my Dad and I used to work on had interiors like that.
Am hoping to get more interior knocked out tomorrow,but Mom just called and thinks she is getting real bad flu.My brother has been sick and I guess she caught it.She is 82,so I am going over there first.
Dad is gone,and Mom`s health comes before anything else.
Here are some pictures from today.
Top cap is done except for installing large 2 inch plugs.I have them made,but my brother is going to do final cut tomorrow at the marina.They have a saw to split them without danger of losing a finger.Then I just glue them in.
I got framing fitted around rear opening today.Using brass screws and just sinking them flush.It will look great when interior is varnished.Some of the real old yachts my Dad and I used to work on had interiors like that.
Am hoping to get more interior knocked out tomorrow,but Mom just called and thinks she is getting real bad flu.My brother has been sick and I guess she caught it.She is 82,so I am going over there first.
Dad is gone,and Mom`s health comes before anything else.
Here are some pictures from today.
Attachments
rex1927
Well-known member
Got 4 hours today.Here are pictures.
Man have I got a pile of planer shavings to wade through.
I can clean up later.I just want this woodie body done first.
Pictures don`t look like much,but it just takes time to fit and install.The doors are going to be a bear.
And when everything is finally done it all has to come back out for finish sanding and varnish.I hope real cold weather holds off or I will have to stop until spring when it is time to do final finishing.
Our shop has no heater.
Thats all for now.
Man have I got a pile of planer shavings to wade through.
I can clean up later.I just want this woodie body done first.
Pictures don`t look like much,but it just takes time to fit and install.The doors are going to be a bear.
And when everything is finally done it all has to come back out for finish sanding and varnish.I hope real cold weather holds off or I will have to stop until spring when it is time to do final finishing.
Our shop has no heater.
Thats all for now.
Attachments
bob w
Still crazy after all these years!
You need to put a heater in your shop so we can enjoy this build all winter. Wood and I don't get along so I am very impressed with your work.
JBailey
Well-known member
I agree with Bob, you definetly need to get some heat in your shop. This project is too dang cool to let sit all winter.
rex1927
Well-known member
Thanks for the nice comments guys.
It makes all the work worth it.
It makes all the work worth it.
rex1927
Well-known member
I finally got a couple hours work in today.
Finished top work.It is ready for sanding and varnish when warmer weather comes.
Our mother is 81 and has some health issues,so I have been with her most of the time.
Working 2 hours every 2 or 3 months it should only take another 20 years to finish
Maybe I can finish the woody body this summer.
However,Mothers health comes first if car never gets finished.
See ya later guys
Finished top work.It is ready for sanding and varnish when warmer weather comes.
Our mother is 81 and has some health issues,so I have been with her most of the time.
Working 2 hours every 2 or 3 months it should only take another 20 years to finish
Maybe I can finish the woody body this summer.
However,Mothers health comes first if car never gets finished.
See ya later guys
Attachments
Last edited:
smallfoot
He's rockin' the "Nuttin Special"!
You're doing some fine wood work on this build! I imagine your Dad is smiling down upon you...
93blazer4dr
Well-known member
your one hell of a awesome wood worker!! I gotta see this baby get rolling.[cl[P
rex1927
Well-known member
HI Guys,
I guess you will see this in parts for sale section and I wanted to tell you why.
Had to go to hospital emergency room because my leg was starting to turn red and blue below knee.They thought it was blood clot ,but thank goodness it was not.
But with no job and no health insurance I am having to try and sell everything I own to pay medical bills.Doctors,tests,techs,etc,etc
Anyway thats why body is for sale.Sure was a lot of tedious and hard work to sell at cost,but sometines bad things happen.
My asking price is my material costs to build,but I will bend a little to make a deal.
Thanks guys.
I guess you will see this in parts for sale section and I wanted to tell you why.
Had to go to hospital emergency room because my leg was starting to turn red and blue below knee.They thought it was blood clot ,but thank goodness it was not.
But with no job and no health insurance I am having to try and sell everything I own to pay medical bills.Doctors,tests,techs,etc,etc
Anyway thats why body is for sale.Sure was a lot of tedious and hard work to sell at cost,but sometines bad things happen.
My asking price is my material costs to build,but I will bend a little to make a deal.
Thanks guys.
Torchie
Well-known member
Hang tough. I have lost many things due to health issue's not the least of which was a house that my wife and I built ourself as well as my right leg...
We have also had no regular income for the last year due to my wife's unemployment and I have had to sell off as much of my stuff as I could to keep us afloat, And when things sold I was thankful for the money. If our situation continues my current project will be up for sale as well.
We do what we have to do to keep on keeping on. Family, our health and a place to live and food on the table take first priority. All the rest is extra and can always come back when the time is right.
Peace and strength to you and your family.
Torchie.
We have also had no regular income for the last year due to my wife's unemployment and I have had to sell off as much of my stuff as I could to keep us afloat, And when things sold I was thankful for the money. If our situation continues my current project will be up for sale as well.
We do what we have to do to keep on keeping on. Family, our health and a place to live and food on the table take first priority. All the rest is extra and can always come back when the time is right.
Peace and strength to you and your family.
Torchie.
