SugarRay8
Well-known member
By the looks of it, I’d say that rust would pretty much wipe off.
Very nice work, I wish my brother would build stuff for me.
Very nice work, I wish my brother would build stuff for me.
36 Dodge truck
- Thread starter Gregster
- Start date
Help Support Rat Rods Rule:
CROMAN69Z28
Member
- Joined
- Jul 4, 2009
- Messages
- 23
DAMN SON! Time to quit sellin rims and start building rods full time. Looks awesome.
Gregster
Well-known member
Thanks ! you know if you stopped by once and a while I would put you to work [ddev
CROMAN69Z28
Member
- Joined
- Jul 4, 2009
- Messages
- 23
Cant find time to work on mine as it is. How in the world will it get finished if I work on everyone elses????
Gregster
Well-known member
Slow progress the last couple of weeks . We fabbed up the kick panels , rolled in a few beads and got them installed .
Started on the covers for the A pillar
Started on the covers for the A pillar
moparcowboy
Well-known member
Nice job, keep up the good work. Want to be my big brother and build me a truck!
Rev Tex Devlle
He's workin' 4 da Lord, in a '46 Ford!
hey man thats looking cool , i need to get down there sopme time! oh i found you a coupe, tell Roger to call Frankie Parker he has one for sell!
Thankful
Well-known member
Greg, this is looking really good. I love how solid the interior is looking. Great work!
skull
''SARCASM: just one of his many talents.''
nice job
wow, hope mine turns out 3/4 that nice!
as freddie prinz used to say " Looookiiinnnggg goooooddd"
now l'm really showing my time on this planet,
'chico and the man' quotes
Later[S
wow, hope mine turns out 3/4 that nice!
as freddie prinz used to say " Looookiiinnnggg goooooddd"
now l'm really showing my time on this planet,
'chico and the man' quotes
Later[S
Gregster
Well-known member
Good question , the bracing under the floor was not as level as I would have liked but was acceptable , I thought it would be easier to just overlay the existing floor . The floor on this truck will be carpeted so the welds will not be seen . If we were going to do a bare metal floor I would have cut all the existing bracing and sheetmetal out and started over for sure . I love the look of beads rolled into metal , but since the plan was for carpet this is the way I went
Cool, that makes total sense.
I love the cowl strech, great subtle way to make leg room.
I'm a little concerned about leg room when (in that dreamy future day) I get to start on my rat truck. I'm not REAL tall, only 6'2", but everything seems to be built for folks under 5'8".
-Chaz
I love the cowl strech, great subtle way to make leg room.
I'm a little concerned about leg room when (in that dreamy future day) I get to start on my rat truck. I'm not REAL tall, only 6'2", but everything seems to be built for folks under 5'8".
-Chaz
Gregster
Well-known member
A little more activity to report on , I positioned and mounted the mastercylinder and pedal assembly , throttle pedal and steering column . We fabbed a neat little drop mount for the steering . We drilled all the gauge holes and test fitted everything , the dash looks like swiss cheese with all the holes . Did alot of bondo work on the A pillar covers and header panel above the windshield and also blended the dash in . I think it's going to have a really sharp interior when finished .
Gregster
Well-known member
Gregster
Well-known member
Let's build a bed
The last few days we've been working on a new bed for the truck . This is my first try at fabbing bed sides and end gate . We frenched the tag and tail lights and made a mock tailgate that looks like a smaller version of one , it won't open but has the look . I wanted something other than a flat panel around the back of the bed . Z.Z. Rat is sending me an old dodge gate that I'll take the dodge logo from and inlay it into the center of our homemade gate , I think it will look great . We did the bed rolls from 1" EMT conduit and also the top of the gate to get the rounded look . We will start on the stake pockets tomorrow morning , after that we will start the smoothing process ( more bondo and sanding )
The last few days we've been working on a new bed for the truck . This is my first try at fabbing bed sides and end gate . We frenched the tag and tail lights and made a mock tailgate that looks like a smaller version of one , it won't open but has the look . I wanted something other than a flat panel around the back of the bed . Z.Z. Rat is sending me an old dodge gate that I'll take the dodge logo from and inlay it into the center of our homemade gate , I think it will look great . We did the bed rolls from 1" EMT conduit and also the top of the gate to get the rounded look . We will start on the stake pockets tomorrow morning , after that we will start the smoothing process ( more bondo and sanding )
Zaq
Member
That bed looks amazing! Hopefully mine will turn out that good...
70_boosted
Well-known member
- Joined
- Nov 16, 2009
- Messages
- 357
truck is coming out as i imagined it from the ideas being planned...level out the rear with the front and the truck will have a killer stance
Z.Z.Rat
Well-known member
Hey Gregster, Haven't forgot you. Finally got ahold of some cardboard to wrap it up. Hope you have a lot of patience! LOL
Gregster
Well-known member
We are making some more headway on the truck , we have finished the body work and have it primed in .
