42 ford

[lowbudget50]

Nice work. It would take me months to get that far.

Thanks!! The plasma table is a big help!! I had to modify one of the brackets from all the rest. Took 2 min to adjust the drawing, then hit cut!!! It's a time saver!!

 

[lowbudget50]

 

[lowbudget50]

Panhard bar attached. Also got the grill shell. Not it's final resting place. But it gives a cool visual

 

[lowbudget50]

Shock mounts

 

[forbigpicture]

Good stuff Low... gotta ask, the picture showing the front with the really nice grill, is that a tissue box holder at the lower front of the table?

 

[lowbudget50]

Good stuff Low... gotta ask, the picture showing the front with the really nice grill, is that a tissue box holder at the lower front of the table?

It would work for tissues!! I built them for rubber gloves!! Hahahaha

 

[Old Stuff]

Always great to see your work. Nice old Bronco grill on the wall!

 

[bob w]

You get an "A" in Bracketology. I've done it myself, but I'm not a fan of single shear mounting of coil overs. Common practice though.

 

[lowbudget50]

You get an "A" in Bracketology. I've done it myself, but I'm not a fan of single shear mounting of coil overs. Common practice though.

I am not really either. But a truck with no weight on the rear I figured it would hold. I haven't really found a way to make a double sheer adjusting mount. Any ideas??

 

[lowbudget50]

Progress

 

[Old Iron]

That's nice work

 

[lowbudget50]

That's nice work

Thanks!!! Believe it or not I've never set up a spring front end like this. Mine have all been air ride. Hope I don't screw this up!!