Cadillac 500

[Neverdone]

Well all the pistons are out. 3 of the cylinders are pretty rough. Just really want to use this motor. Always wanted a big ground pounder earth shaker so that is the goal. Now I need to find a shop to see if this is going to be a useable block.

 

[earthman]

Hope this works for you

 

[Neverdone]

Me too. I got the name and number of a couple good local engine machinists..... Calls will start this week.

 

[JBailey]

Hey was cruising craigslist and came across this http://desmoines.craigslist.org/pts/4634537654.html and remembered seeing this thread. Good luck with your block!

 

[Rapidrobert]

id. Cad

Look on back of mtr right side where trans bolts # 5200 maybe 500

 

[Rapidrobert]

500c.i. cads

Ihave 4 cadillac. setting on the floor 1 is 472 3 are 500,s at 1 time 6 500,s sold them traded. brutish motor lots of torque 3500 3800 rpm,s a. Old cad weighed about 4000 4 people 800. u could put your foot just hammer it. do it over and over. Cad. Company 505 823 9340 parts and books 429 473 500 stuff this is good source hank the big dog just put one astreet rod r something he is RRR MEMBER from missouri good guy. look for casting 5200 right rear side block hat be 472 or 500 for sure you get inside to be absolute most 500.s. Near4th main journal have number 93 or 94. 472# 24 on 3rd couterweight thans rapidrobert