Heating delete

[R_CK_R]

Hi Guys,

I'm rebuilding a 303 Oldsmobile Engine and want to delete the heating.
I think the engine is famous in hotrods and I think they don't have heating either.
Can anybody tell me if there are already parts to close the water holes for the heating System?
I think the hole in the cylinder head can be closed with a simple plate and the hole in the waterpump with a screw?

here is a Little Picture which Shows what i want to close...

I hope you guys can help me out.

best regards,
Kai

 

[endicott_jb]

Well, you can either cap off the 2 lines indivually or you could run a hose from one to the other so that there is a continuous flow through the 2 ports.

 

[R_CK_R]

Well, you can either cap off the 2 lines indivually or you could run a hose from one to the other so that there is a continuous flow through the 2 ports.

that is a very good idea!
easy to do and it gets me the effect I want

Thanks

 

[Old Iron]

A simple block off plate on the rear and take the tube out and put a pipe plug in the water pump hole

 

[Perfectly Flaw'd]

A simple block off plate on the rear and take the tube out and put a pipe plug in the water pump hole

What he said^^^

 

[MercuryMac]

What they said. ^^^^ [