I.F.S.

[Bruce R]

Anybody out there got any experience with those Crown Vic. front suspensions they talk about on FastnLoud ???

 

[williej45]

in a full size car or a tbucket? makes a big difference what you plan to use it in.

 

[Bruce R]

Ifs

55 mercury

 

[Bamamav]

They might be too wide for your car. Jag xk might be a better fit. Or Mustang II style.

 

[Skip]

S10, but you will need wide wheels for fill the wells. Not necessarily a bad thing. My 39 (see avatar) has an S10 under it, and I had to use 8.5 wide wheels to get it looking right. It is much lower now, BTW.

 

[gold03]

It's a good front end. Easy to work on. You need to match the wheel/tire width of the vehicle you are building to the donor vehicle. Or find a wat to adjust with wheel of set.

 

[wayfarer]

The crown is too wide and the shiverlay is waaay too narrow.
A first gen Dakota should be closer and has the proper bolt pattern.

 

[Todd]

The crown is too wide and the shiverlay is waaay too narrow.
A first gen Dakota should be closer and has the proper bolt pattern.

The first gen rotors will swap on to a second gen dakota.

 

[Willowbilly3]

I see a lot of guys using them on FTE. Personally I don't like the looks of them on a vehicle that originally had a narrower track width and am not a fan of the offset (look) of the modern wheels they are designed for. I do have one under my 2003 Gran Marquis and find the steering too quick off center and twitchy to get used to.