35Mastr
Mastr Blastr
I just run across a Lincoln V350-PRO.
Does any one know anything about them?
I can get it cheap.
Does any one know anything about them?
I can get it cheap.
Lincoln
- Thread starter 35Mastr
- Start date
Help Support Rat Rods Rule:
Bonehead
Skull Master
Several different versions, depends on how it was set up originally. I think it is a good unit, but it may be a base model or it may have all the bells and attachments.
35Mastr
Mastr Blastr
This is whats in the ad.
The Invertec V350-PRO is a versatile, multi-purpose, multi-process power source that's lightweight and portable. Available in construction, factory, advanced process and factory rack models, the V350-PRO is capable of doing virtually any job, whether in the shop or on the construction site. The V350-PRO is capable of stick, DC TIG, MIG, Pulsed MIG (requires Advanced Process Panel), flux-cored and arc gouging, making it the most versatile inverter power source in its class. And it's built tough to handle the rigors of harsh environments.
Advantage Lincoln
• Economy Construction Model
• All input voltages and frequencies are both single and three phase rated — no phase derating necessary on single phase.
• 5-425 amp output range for all recommended processes from TIG to arc gouging.
• Input voltage from 208-575 — this one machine is capable of running on virtually any input power supply.
• 50 and 60 Hz operation — can be connected anywhere in the world.
• Touch-Start™ TIG for contamination-free starts.
• 87% efficiency — low power consumption for energy savings.
The Invertec V350-PRO is a versatile, multi-purpose, multi-process power source that's lightweight and portable. Available in construction, factory, advanced process and factory rack models, the V350-PRO is capable of doing virtually any job, whether in the shop or on the construction site. The V350-PRO is capable of stick, DC TIG, MIG, Pulsed MIG (requires Advanced Process Panel), flux-cored and arc gouging, making it the most versatile inverter power source in its class. And it's built tough to handle the rigors of harsh environments.
Advantage Lincoln
• Economy Construction Model
• All input voltages and frequencies are both single and three phase rated — no phase derating necessary on single phase.
• 5-425 amp output range for all recommended processes from TIG to arc gouging.
• Input voltage from 208-575 — this one machine is capable of running on virtually any input power supply.
• 50 and 60 Hz operation — can be connected anywhere in the world.
• Touch-Start™ TIG for contamination-free starts.
• 87% efficiency — low power consumption for energy savings.
Attachments
Bonehead
Skull Master
Additional parts...
Power Source
Invertec® V350-PRO
Construction Model K1728-5
Wire Feeder
LN-25 PRO K2613-1
Wire Feeder Optional Features
Work and Wire Feeder Power Cables and Work Clamp K1803-1
Drive Roll Kit -
5/64" Solid/Cored Wire KP1697-5/64
Magnum® Accessories
350A FCAW-SS Gun
(15 ft, .062-3/32") K126-2
Power Source
Invertec® V350-PRO
Construction Model K1728-5
Wire Feeder
LN-25 PRO K2613-1
Wire Feeder Optional Features
Work and Wire Feeder Power Cables and Work Clamp K1803-1
Drive Roll Kit -
5/64" Solid/Cored Wire KP1697-5/64
Magnum® Accessories
350A FCAW-SS Gun
(15 ft, .062-3/32") K126-2
35Mastr
Mastr Blastr
All that stuff is for mig process.I just want to use it to Tig.
Bonehead
Skull Master
I think it would probably do anything you ever wanted. But you have to know what it comes with. Maybe just arc leads. Or Tig torch, and arc leads. If it comes with a gas hook up, and wire feed too then you have it all covered.
Bonehead
Skull Master
Sounds like it comes set up for TIG
35Mastr
Mastr Blastr
All the guy has is whats in the picture.
Bonehead
Skull Master
35Mastr
Mastr Blastr
He's got just what is in the bottom of the cart.
Bonehead
Skull Master
Here at least is a few part numbers for the additional part you may need.
https://weldingsupply.securesites.com/cgi-bin/spider.pl?K2438-1||1|341
And check out that price.
https://weldingsupply.securesites.com/cgi-bin/spider.pl?K2438-1||1|341
And check out that price.
Bonehead
Skull Master
Makes you wonder what the guy was doing with it without any leads? Are the serial numbers still there?
35Mastr
Mastr Blastr
Makes you wonder what the guy was doing with it without any leads? Are the serial numbers still there?
He bought one of those storage garages that people dont pay for and then they sell the stuff at auction.
He also has a
Miller S22A
Miller XMT200
Miller Thunderbolt 225
LordMaximo
We call him King Maximo!
Well all you have there is the main power supply for the program. You will still need to acquire the MIG and Tig assemblies to make it a complete welding unit. If you are picking it up for less then $500, its' a start in a better direction. Happy hunting and good luck. Maybe one of those other units is supose to accompany that power supply?
Maximo
Maximo
