Mopar 318 wide block

[soltz]

Those are 80's Ford truck wheels. Hard to find anymore. I have a set on my sons 82 F100 that came on it. Got to get around to building it one of these days....[/QUOTE]

Maybe not, my 94 and 96 have the same wheels from the factory [S that's how i knew they were ford.

 

[peabody]

[cl [cl [cl
Now ????
How did we go from mopars to ford wheels ?!?

 

[05snopro440]

Maybe not, my 94 and 96 have the same wheels from the factory [S that's how i knew they were ford.

Yeah, those wheels were on the ford pickups to 96. That's how I knew them.

 

[05snopro440]

[cl [cl [cl
Now ????
How did we go from mopars to ford wheels ?!?

My fault, Peabody [ddd

 

[Bamamav]

Just normal for things to go off in a different direction around here.

I should have said 80-96 wheels. IIRC, Ford and Dodge trucks had the same bolt pattern. I had a set of Dodge turbine wheels on a 84 Ford pickup.

 

[peabody]

My fault, Peabody [ddd

[cl. Hahahaha! ! No Worries! !![cl

 

[soltz]

Just normal for things to go off in a different direction around here.

I should have said 80-96 wheels. IIRC, Ford and Dodge trucks had the same bolt pattern. I had a set of Dodge turbine wheels on a 84 Ford pickup.

Bamamav i think your a little confused
it's ok old timer[P

 

[23crate]

318 polys ,, and a vicious rumour

'tis my understanding from a old racer (means that politely) that the poly motors may accept a spare set of Hemi heads,,

something the ole racers came to find when hemi blocks started to get a little scarce,, buy a poly a chuck the heads in favour of swapping out the hemi heads....

be intrigued to find if this is workable [S

 

[MercuryMac]

Glad to hear from you again Crate and glad you brought the thread back to Mopar stuff.
It's my understanding that the early Poly's with the exaggerated bites out of the valve covers were the only ones you could make back into a Baby Hemi. They came from 1955 and maybe a little of '56. With that said, I hope one day to make 1966 Poly, with only wavy valve covers, into a look-alike Hemi, ----- and fool all of you guys. I'm half way through making a six pack carb setup for this Hemiphony motor.

 

[Blue Eyed Devil]

'tis my understanding from a old racer (means that politely) that the poly motors may accept a spare set of Hemi heads,,

something the ole racers came to find when hemi blocks started to get a little scarce,, buy a poly a chuck the heads in favour of swapping out the hemi heads....

be intrigued to find if this is workable [S

Not nearly as workable as some may think. See my earlier post in the thread...