My 1926 Dodge build start

[Marty Z]

I didn't get a picture of the part I made, it is a piece of 5/8 thick plate, welded inside a piece of 2" pipe, I drilled all the way through the frame, that way I could get to the nut on the tierod end.

 

[Marty Z]

Here is the shocks setup. I am going to run a piece of teflon between the arm and the wishbone.

 

[Marty Z]

Got the tilt steering column mounted. It is from a 1994 chevy truck.

 

[Marty Z]

Had to do a little grinding on the block for the steering joint to clear.

 

[Marty Z]

Got the tail lights mounted. Here's what She is looking like so far. Just about ready to tear her down to finish welding on the body and frame. See anything I should do different?

 

[klink]

Nice build! the stance and body placement really looks good.

 

[Tripper]

Lookin' really good!!! [cl

BoB

 

[ratadixshun44]

Me likes also, that front end shot is kinda menacing looking, but really cool[cl[cl[P

 

[DozerII]

Really cool build, will be watching
[P[P

 

[Marty Z]

got everything fitted and back off again to do some final welding on the frame. I hope this will be the last time.

 

[Marty Z]

welding up the transmission tunnel, need to add some steel on the cowl. I think I have been welding for days now [

 

[Old Iron]

Looks really good.
I know how that welding thing feels