non marring steering wheel puller

[billy]

 

[2.3Turbo_T]

Outstanding! Total rat rod ingenuity. I like it!!

 

[Bamamav]

I'm missing something here? [S Looks like the jack is just pulling the straps tight, but the jack is pressing against the wheel? [S Or do you have something under the block of wood pressing against the steering shaft? [S

 

[billy]

I'm missing something here? [S Looks like the jack is just pulling the straps tight, but the jack is pressing against the wheel? [S Or do you have something under the block of wood pressing against the steering shaft? [S

the steering shaft nut is loosened almost all the way
so the wood is pushing on it
i soaked it with penetrating oild and put that thing on
every once in a while i would tighten it mnore
two days later i heard a noise that sounded like a cross between a bull whip and a gunshot
that thing had popped loose
if i hadnt put the shaft nut back on it would have taken out the rear window.

 

[billy]

when i replace the next wheel i will use this again for sure

 

[Old Iron]

two days later i heard a noise that sounded like a cross between a bull whip and a gunshot
that thing had popped loose.

I have to hand it to ya, you are a patient man
I would have never thought of the jack idea [cl

 

[billy]

I have to hand it to ya, you are a patient man
I would have never thought of the jack idea [cl

i had a full plate
while my puller was doing its work
i was rewiring
and replacing every single rubber or plastic seal hose and gasket on that willys jeep
took me two years

 

[billy]

i am gonna replace the wheel on the shaggin waggin
and that hasnt come off in 51 years

 

[05snopro440]

Love the ingenuity, but you know that pullers are super cheap, or easy to make... right?

 

[billy]

Love the ingenuity, but you know that pullers are super cheap, or easy to make... right?

mine was a dollar

 

[23crate]

he he he .. over here we'd call that 'O' for orsum !

good thinking !

 

[wjcgasser]

Isn't that something you would see in a Walmart parking lot, just go get the parts' wheel will be loose by the time you get home

 

[CPatton]

My son made this for a stuck brake drum.

 

[soltz]

That works, good thinking,(for a kid)