putting a 37 car front clip on a truck

[izzy]

anyone done this before? Thinking about doing this, found a 37 truck on ebay and it had this done to it. Just got my mind spinning.[S[S

 

[skull]

pic

pics and dimensions wold help a bunch.

Later

 

[Soreback]

46/39

http://i302.photobucket.com/albums/nn120/OldGold2008/46 ford/004.jpg

 

[Old Iron]

http://i302.photobucket.com/albums/nn120/OldGold2008/46 ford/004.jpg

I do love that year front end [cl

 

[Skip]

I'm pretty sure it is a bolt on. I am working on my two '38/39 pickups. Using stock front sheetmetal because the car stuff is more expensive than my whole project so far.

 

[DOUGIEB59]

am really liking the photobucket... the imagination out there is all but overwhelming!!

 

[izzy]

thanks for the pic, when it cools down a little i will be getting back to it. It has been very very hot this past few weeks up here, I deliver water for a company up here and with the heat i have been very busy with work.[dr

 

[Skip]

I saw one at the Portland swap meet this year. Very nice.

 

[Dirtyrat]

I love that pic, what a great project that would be!

 

[HALLnRODZ]

I'm putting 40 sedan FSM on my 46 Ford cab(Homemade 40 pup in builds) Unlike your cabs in the States, our were different where the guards bolt up. To get around this I am blending a sedan cowl onto the truck cab. I could have made a bonnet by combining the truck and sedan one and filled in the area where the guards go so it all looked nice, but I wanted the sedan dash so that's why I swapped the cowl.

Cheers
Andrew