This is princess!

Rat Rods Rule

Help Support Rat Rods Rule:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

lowbudget50

Creators of all things awesome
Joined
Sep 23, 2012
Messages
6,106
6 months ago I bought another 79 bronco. I think it has been seen here in my redneck rotisserie thread in the shop tools section. Definitely not the normal build on here but I thought I would share if y'all Wana see it.


This truck is called princess cause she was a pavement princess, build for mall crawling in the 90s hahahaha. Here are some pics of when I got it and one of it in its hay day.


IMG_20240415_211043 (5).jpg
IMG_20240415_211044 (1).jpg
IMG_20240603_102822.jpg
 
I ended up buying a spare body that had some parts I needed. Bought it swapped out the parts and sold it for what I payed for it!!!


Body was but on the rotisserie and the bottom was sand blasted completely clean. It will be paint matched. No under coating. after the sand blasting I coated the interior of all the body structures to prevent rusting

It had 2 small rust spots in the floor and we found a few more as the body was stripped m nothing we couldn't fix.

Frame was stripped and sent to powder coating

IMG_20240712_121550929.jpg
rust repair .jpg
IMG_20241209_160317832_HDR.jpg
IMG_20240730_182043807.jpg
 
The body was sent to paint and worked over. Surprisingly it was in decent shape. All cars of this era have rust, but it wasn't out of control. It was taken down and brought back up with great care by the painter. As of right now it is in primer on the exterior and the interior and underside are painted along with some of the small parts
IMG_20241130_120655988_HDR.jpg
IMG_20241211_184629691_HDR.jpg
IMG_20241211_184603892.jpg
IMG_20241211_184519557_HDR.jpg
IMG_20241213_135155537_HDR.jpg
IMG_20241216_140854.jpg
IMG_7193.jpg
IMG_20241226_180209.jpg
IMG_7209.jpg
IMG_20241227_153943.jpg
 
I tore the rear axle down and fixed all garbage welds and wear and tear on it. Also tore the tcase apart and checked it out. New seals and a good scrubbing then a nice coat of paint. Finished the rear axle in black also with a set of disc brakes

Also got out the new powder coating system I bought from Eastwood. Bought some color matched powder. Looks good and easy to use!!
IMG_20241214_113844174_HDR.jpg
IMG_20241214_113856762_HDR.jpg
IMG_20241214_154203871_HDR.jpg
IMG_20241215_133353382.jpg
IMG_20241215_191654438_HDR.jpg
IMG_20241221_163037068_HDR.jpg
IMG_20241221_163047197_HDR.jpg
IMG_20241220_182347606_HDR.jpg
IMG_20241221_095047218_HDR.jpg
 

Latest posts

Back
Top