31 chev 5 window

[31chevrod]

rad grill shortened 5 inches, headlights mounted

 

[31chevrod]

new tires and rims mounted, shocks mounted, new cowl steering rod, tie rod bar installed and lake headers started wahoooo! This **** is comin together son!!

 

[31chevrod]

got my pipes all tacked up.... then to realize the exhaust ports on the pass side are 3 inches more forward than the drivers weird 472 engine oh well, gonna trim the drivers trumpet back so that they are the same when I install the turn outs.

 

[8literbeater]

got my pipes all tacked up.... then to realize the exhaust ports on the pass side are 3 inches more forward than the drivers weird 472 engine oh well, gonna trim the drivers trumpet back so that they are the same when I install the turn outs.

The exhaust looks good. Personally, I wouldn't trim it. One head sits further back (naturally), then so be it. The exhaust sits further back.

 

[Skip]

The exhaust looks good. Personally, I wouldn't trim it. One head sits further back (naturally), then so be it. The exhaust sits further back.

It might messing with the "tuning" on the headers, too. Change the sound...

Looking great. I like asymmetric.

 

[31chevrod]

rear tires installed, lake headers full welded with flanges for mufflers and turn outs. I cut my tacks on the drivers side and slid the trumpet down 3 inches. they are now even at the back (was reassured that the shortened one on the drivers side will not effect the sound) had a great swap meet sat got a alternator,34 ford horn,some switches and some seat belts

 

[31chevrod]

seat frame raw, seat frame modified, foam temp installed

 

[31chevrod]

changed headlights over to 9007 bulbs and LED signals all inside the stock body

 

[31chevrod]

mounted my 34 ford horn

 

[Country Misfit]

Looking good !

 

[soltz]

Very Nice

Coming along fine [cl

 

[31chevrod]

thanks guys, now I have to send my schroud off for the rad to get built.

 

[MercuryMac]

Keep on tinkering, you're doing fine.

 

[31chevrod]

started rear brake lines and front brackets

 

[31chevrod]

New gauges!!!

 

[christcrusader13]

This is gonna be puuuuuuuuuuuuuuuuuuuuuuurdy![dr

 

[supersmitty]

Very nice! Love the gauges!

 

[forbigpicture]

changed headlights over to 9007 bulbs and LED signals all inside the stock body

31, like what you did with the head light's , like to know how they work out
I'll be trying to do the same on a ol' rat on the back burner....
[cl[cl[cl

 

[31chevrod]

thanks guys, I hope the headlights work well, I thought about getting some safety glass cut to put in the buckets for lenses instead of originals any thoughts?

 

[CORPO]

looking really good.. i would definitely run the original lenses keep the look... i went through (actually my dad) the headache of cutting lenses off of T3 bulbs to keep the old look