61 Volkswagen V8 Single Cab Street Rod

[Ben Modified]

I removed the front suspension today so that I could get access to the front portions of the truck. I needed to do a lot of welding, grinding and smoothing without damaging the chrome and stainless.

[/url]20160927_114653 by Ben Modified, on Flickr[/IMG]

[/url]20160927_172640 by Ben Modified, on Flickr[/IMG]

Also added a small bit of sheet metal to finish off the front of the cab.

[/url]20160927_173613 by Ben Modified, on Flickr[/IMG]

[/url]20160927_172622 by Ben Modified, on Flickr[/IMG]

While I have the brake system open, I need to remove the factory drum brake residual valves from the Wilwood brake master cylinder. I had already installed 2 lb disc brake residual valves in line for the four wheel disc brakes.

http://www.BenModified.com

 

[Ben Modified]

Putting everything back together. Road trip on Saturday.

[/url]20160928_160251 by Ben Modified, on Flickr[/IMG]

[/url]20160928_161540 by Ben Modified, on Flickr[/IMG]

http://www.BenModified.com

 

[Ben Modified]

The suspension is back on and the brakes are bled.

[/url]20160929_185357 by Ben Modified, on Flickr[/IMG]

Also made an addtional support for the exhaust system

[/url]20160929_185500 by Ben Modified, on Flickr[/IMG]

Re-installed the doors along with the windows and frames

[/url]20160929_185334 by Ben Modified, on Flickr[/IMG]

And wrapped the exhaust more completely, near the engine mounts.

[/url]20160929_174459 by Ben Modified, on Flickr[/IMG]

Changed the oil in the rear axle
Repacked the wheel bearing grease up front
Repaired a few pin holes in the sheet metal under the windshields
Added a scoop on the underside to direct additional air to the engine
Installed several rubber coated clamps on the brake lines and shifter cable

http://www.BenModified.com

 

[Ben Modified]

Ready to hit the road

[/url]20160930_174001 by Ben Modified, on Flickr[/IMG]

http://www.BenModified.com

 

[Burgerman]

Door Hinges

Nice work on those door hinges Ben. Terrific Single Cab rod.

 

[400orbust]

I'm a type 2 purist but I gotta admit this has turned out pretty cool. Nice work.

 

[Skip]

This thing makes me grin.

Nice work.
Out-there design.
Just too much fun!

[cl

 

[Ben Modified]

I'm a type 2 purist but I gotta admit this has turned out pretty cool. Nice work.

This thing makes me grin.

Nice work on those door hinges Ben. Terrific Single Cab rod.

Thanks for the kind words! The trip to Crusin the Coast went well. 1100 miles round trip! 13-15 mpg and 100's of cell phones clicking photos along the way! That's always fun

 

[Burgerman]

Welcome Back

How cool to take the Single Cab out on a long run.

 

[Ben Modified]

Some footage from my Road Trip to Cruisin the Coast in the VW Single Cab Street Rod

https://www.youtube.com/watch?v=2KBWW5JzVC8


http://www.BenModified.com

 

[sgtpontiac]

Nice!!

Had to be great driving that 1100 miles without a hitch...great job..[cl

 

[Ben Modified]

Had to be great driving that 1100 miles without a hitch...great job..[cl

Thanks! It was a lot of fun and more comfortable than I expected.

 

[Ben Modified]

I have never been completely happy with the headlights on the truck and decided to try out a different set. They are Model A reproductions and will be mounted near the wheels and will turn with the steering. They will also be positioned near the trucks original location when pointed straight ahead. Made the mounting brackets today.

Started with a paper template.

[/url]20161122_111058 by Ben Modified, on Flickr[/IMG]

Then cut the brackets out of a piece of scrap

[/url]20161122_111136 by Ben Modified, on Flickr[/IMG]

[/url]20161122_123855 by Ben Modified, on Flickr[/IMG]

[/url]20161122_125929 by Ben Modified, on Flickr[/IMG]

Painted the brackets and will install with the headlights tomorrow.

http://www.BenModified.com

 

[dutch]

I love how the truck turned out. Looks like freak but a well balanced one [cl

 

[Ben Modified]

I love how the truck turned out. Looks like freak but a well balanced one [cl

Thanks!

I mounted the headlights today but am not happy with the way they look. Too far apart and too conservative.

[/url]20161123_084012 by Ben Modified, on Flickr[/IMG]

Decided to play around with the original headlights again

[/url]20161123_143014 by Ben Modified, on Flickr[/IMG]

[/url]20161123_144118 by Ben Modified, on Flickr[/IMG]

[/url]20161123_153718 by Ben Modified, on Flickr[/IMG]

Also experimented with some motorcycle lights

[/url]20161123_164014 by Ben Modified, on Flickr[/IMG]

Possibly recessed into the nose at an angle following the body line

[/url]20161123_164503 by Ben Modified, on Flickr[/IMG]

Any suggestions?


http://www.BenModified.com

 

[bob w]

The headlights create the "face" the front of the car has. Being careful on placement, like you are doing, is important.

 

[dutch]

I really like the first 2 options as they immediately spelled VW to me....

check this out;



http://vw-kaefer.npage.ch/die-geschichte-des-vw-kaefers.html

 

[Ben Modified]

This is what I went with along with a single motorcycle light on each spindle (not in photos). I installed an amber led in the lower sockets of the vw buckets also. These lights along with the lights in the bull horns will serve as running lights as well as blinkers. As an added benefit, the headlights actually meet the minimum height requirement in my state.

[/url]20161125_165147 by Ben Modified, on Flickr[/IMG]

[/url]20161125_165058 by Ben Modified, on Flickr[/IMG]

[/url]20161125_164946 by Ben Modified, on Flickr[/IMG]

http://www.BenModified.com

 

[dutch]

awesome

 

[Burgerman]

Lights

The VW light housings are a cool link to the VW past. My bug has the same big glass and it's fun and cool.