earthman
Fascinated by rolling objects!
Seeing the split manifold takes me back. The sound from the forthcoming video is going to take me back again.
Chevy/Reo?
- Thread starter bob w
- Start date
Help Support Rat Rods Rule:
bob w
Still crazy after all these years!
Stopped at my favorite muffler shop, Dave's Exhaust, and got 6 flanges and 4 gaskets for 20 bucks. I put some curve in the down tubes and welded the flanges in place. Yesterday I ordered u-bends and today I order a 10 foot straight pipe. Thinking of putting two 12 inch motorcycle baffles in each straight pipe. Not sure if it will give me the sound I would like. Yes, E-man, a video with audio will happen.
DJ3100, my MIG is a Lincoln. But it's good I kept my old Miller for jobs like this. When I narrow an I-beam front axle I weld it with the Miller. I like the heat it puts into a weld
Tim, there's a really good thread on the PORK site about splitting exhaust manifolds.
Snake Farm
Ol school snake charmer!
Looking good Bob!
BTW you do know they still make "Smithys" right.
[P[P[P
BTW you do know they still make "Smithys" right.
[P[P[P
falconvan
Well-known member
Nice, Bob! Have you ever MIG welded cast to steel before and how did it hold up? I had to change the exit flange angle on my drivers manifold and did the same thing. The weld looks good but I was wondering how its going to hold up when it starts heating up and cooling down.
Flipper_1938
He recycles the right way
I've done it before and had good luck. ...but I may just be lucky.
bob w
Still crazy after all these years!
Simple shift linkage in tight quarters. It's connected to an old Mustang shifter.
falconvan, I've welded cast iron three times, in 1958, 1968 and now. Used an AC stick welder with Nickel/Stainless rod each time. When I was researching this subject on the Google I found people that said they successfully welded cast iron with a wirefeed (MIG).
falconvan
Well-known member
Cool; if it just makes it through this year I'll be happy. id like to add some headers next winter. Nice shift linkage!
Neverdone
He's not done yet...
I never even knew welding steel to cast was possible.....
bob w
Still crazy after all these years!
The left side exhaust pipe is complete, except for welding. I'll turn the pipe inboard in front of the rear wheel. Smithy mufflers will be placed under the trunk in back. Gotta have Smithy's for that 6 cylinder sound.
Snake Farm
Ol school snake charmer!
bob w
Still crazy after all these years!
Here's the front pipe sneaking down under the oil pan to meet the pipe running down the other side. Still more work to do over there.
sgtpontiac
Older, Wiser and Still Buildin'
Looks like a tight fit.....
Have to ask....what is the steering box from? I've got an old 50 chevy pickup box and column that looks similar......
Have to ask....what is the steering box from? I've got an old 50 chevy pickup box and column that looks similar......
bob w
Still crazy after all these years!
Here's the pipe coming out from under the oil pan. I ended the head pipe here so it would be easy to install and remove. The side pipe attaches with the flange.
Sgt. it is a Chevy truck steering box. Not sure of the year but around 1940.
sgtpontiac
Older, Wiser and Still Buildin'
Good to know...thanks
like the way that manifold came out.....very innovative...
like the way that manifold came out.....very innovative...
bob w
Still crazy after all these years!
The side pipe snakes out under the frame and ends at the back of the body. When the parts arrive I'll turn the side pipes 90 degrees under the frame just past the body then aim them straight back and connect the Smithy mufflers.
Flipper_1938
He recycles the right way
Fire that sucker up as is! I bet it would sound pretty good.
shakey56
Well-known member
Smittys....
The only sound sweeter than a Smitty is a whisper down a perfumed neck on a moonlit night.....LOL.
I do love a 6 cyl split exhaust. Lookin' good.
Lynn
The only sound sweeter than a Smitty is a whisper down a perfumed neck on a moonlit night.....LOL.
I do love a 6 cyl split exhaust. Lookin' good.
Lynn
bob w
Still crazy after all these years!
I must be getting old and slow. It took 5 hours to make a pair of seat frames. Made them out of 1/4" by 1". The bends were made by heating an 8" section to dull red and bending the steel around a plywood form. The plywood was pretty charred by the time I got 8 bends done.
I want to use old, worn fabric or leatherette on these seats.
shakey56
Well-known member
Seats
Hey Bob...I'm putting aluminum bomber seats in Buford. I went to Kmart and bought 2 flight jackets right before Christmas. They are fake distressed leather but they look real. I'm gonna have cushions made and covered with the jacket material by a guy that does furniture. (I figure a furniture guy will make better cushions than an automotive shop.) The best part is they were on sale for $40 bucks apiece. Something you might consider...just a suggestion.[S
Lynn
Hey Bob...I'm putting aluminum bomber seats in Buford. I went to Kmart and bought 2 flight jackets right before Christmas. They are fake distressed leather but they look real. I'm gonna have cushions made and covered with the jacket material by a guy that does furniture. (I figure a furniture guy will make better cushions than an automotive shop.) The best part is they were on sale for $40 bucks apiece. Something you might consider...just a suggestion.[S
Lynn
Dirtyrat
Got Fins?
You can actually get distressed material, talk to the upholstery places.
