Mini Muscle Car
- Thread starter bob w
- Start date
Help Support Rat Rods Rule:
Old Iron
Well-known member
[clNew math
I have an older style Pro Tools air over hydraulic one shot bender
bob w
Still crazy after all these years!
I have a borrowed (for 5 years now) JD2 manual ratchet type bender. There's no degree indicator on it. It does beautiful bends but I have to measure the bend degrees with a carpenter's protractor. JD2 recommends making a test bend and using it for a template. By making the template out of the same size and thickness it eliminates the need to calculate for stretch. Just lay the template on the tubing where you want the bend and mark it. It's so easy even a left handed Polish senior citizen can do it. Hah!
hansgoudzwaard
Well-known member
- Joined
- Jul 2, 2012
- Messages
- 732
I have used....
This method.
On a chopper frame.
http://www.pirate4x4.com/tech/bendin_tube/index.html
This method.
On a chopper frame.
http://www.pirate4x4.com/tech/bendin_tube/index.html
soltz
The Rat Captain
That's simple enough i think i can follow it, thanks [cl
Don't need it now, but you never know [S
Don't need it now, but you never know [S
Old Iron
Well-known member
Definitely simple enough!!!!!!!!!!!!!!!!!!!
falconvan
Well-known member
Great looking tubs, Bob!
bob w
Still crazy after all these years!
I ordered roll cage tubing yesterday and later was told it is back ordered for a week. Made this template for the main hoop out of 1/8" Masonite hard board.
bob w
Still crazy after all these years!
Now, all I have to do is bend the tubing to match the template.
Yes, FV, the tubs worked out pretty good. I would have preferred to weld them on the inside, but I needed help to do that.
bob w
Still crazy after all these years!
Roll cage material arrived at the steel yard yesterday so today I measured, measured, measured and finally bent the main hoop and the halo bar. The halo bar is way too long and will be trimmed to size.
soltz
The Rat Captain
Looking good [cl
Next [P
Next [P
Torchie
Well-known member
05snopro440
Well-known member
Roll cage material arrived at the steel yard yesterday so today I measured, measured, measured and finally bent the main hoop and the halo bar. The halo bar is way too long and will be trimmed to size.
For a second I thought you were going to make one of these
:
bob w
Still crazy after all these years!
It's hard to take a pic inside a little car like this. But here is the halo bar tacked to the main hoop. It's also hard for an old boy like me to crawl around inside the car. I'm spending half the day on the Renault and the other half on the Bantam.
Have you seen the You Tube of that thing, snopro? Pretty funny.
Old Iron
Well-known member
Nice work.
How many point roll cage will you be doing?
How many point roll cage will you be doing?
05snopro440
Well-known member
It's hard to take a pic inside a little car like this. But here is the halo bar tacked to the main hoop. It's also hard for an old boy like me to crawl around inside the car. I'm spending half the day on the Renault and the other half on the Bantam.
Have you seen the You Tube of that thing, snopro? Pretty funny.
I sure did! It's amusing!
I can't wait to see how this car ends up! Do you ever build larger vehicles? [ddd
old28
Well-known member
Ya half day on the Renault and half on the Bantam. I know you don't sleep so there has to be another build deep in the old shop for night hours.
Keep at it, we are all enjoying the builds.[cl[P
Keep at it, we are all enjoying the builds.[cl[P
bob w
Still crazy after all these years!
Got the hard part of the roll cage done. The main hoop, halo bar and the A pillar tubes are bent and welded in place. All that remains is the rear diagonals from the main hoop to the frame and the door bars. Both straight tubes. Only made one major mistake; the A pillar tubes run in the way of the inside door handles and won't close. they'll have to be moved.
No additional projects, Tom. I do have a lot of vintage sheet metal laying around though...
Oh, I forgot, there's a seat back tube and a dash bar to install too.
old28
Well-known member
Say Bob, that cage looks like it will pass 7.50 - slower tech, May want a bigger motor to increase fun level. Nothing like a short WB & big motor old school hot rod. Keep up the great work. [cl[P
